Most adaptors are powered by the parallel port; however if you experience difficulties you can apply external power. Georg Bende Softwareentwickler Abteilung Elektronik Dr. Fritz Faulhaber GmbH & Co KG Daimlerstr. 23 71101 Schaich Tel: +49 7031 638294 > -----Ursprgliche Nachricht----- > Von: praveen [mailto:] > Gesendet: Montag, 19. Juli 2004 01:13 > An: > Betreff: [motoroladsp] Power - JTAG question . > Please omit the previous email. > Hi All > I have a question. I am using my own design board. I am using the JTAG > to program the board. What about the power supply. The pin 11 of the > JTAG connector requires 3.3 v. Is this supplied by the parallel port?. > > I connect the board through the newmicro JTAG and then to the > parallel port. > > Should I connect an external source (3.3 v) to the pin11? In general > how the JTAG connector is powered. Is it through the parallel port or > it requires an external source. Can any one help me on this? > Thanks > Praveen > > > ------------------------ Yahoo! Groups Sponsor > --------------------~--> > Yahoo! Domains - Claim yours for only $14.70 > http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/PNArlB/TM > -------------------------- > ------~-> > > _____________________________________ > Note: If you do a simple "reply" with your email client, only > the author of this message will receive your answer. You > need to do a "reply all" if you want your answer to be > distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: > > To Post: > > To Leave: > > Archives: http://www.yahoogroups.com/group/motoroladsp > > More Groups: http://www.dsprelated.com/groups.php3 > > Yahoo! Groups Links > |
AW: Power - JTAG question .
Started by ●July 19, 2004