Hi, I'm just starting with the DSP56F827EVM, and I am wondering which development software should I start with the SDK or CodeWarrier? My overall goal is to read from the ADC channels and store the results on a SD card (external compactFlash) using SPI to transfer the data. Once I have that down I would like to use JTAG to change the sampling rate of the ADC from a laptop. I know it a lot of work, but any help (examples and stuff)on what's the best way to start would be appreciated. Regards, |
|
just starting
Started by ●November 14, 2004
Reply by ●November 14, 20042004-11-14
Hello From my experience with the 56F8346 which must not be too different in this regard, Codewarrior with the Processor Expert "beans" would be the fastest way to get started. The JTAG port is used for debugging and loading program code; for communicating with a PC to change the ADC sample rates, it would be much easier to use a serial port so you can work with Hyperterminal or another communication program on the PC. Another very elegant method is to use the free PC-Master application that comes with the Motorola Motor Control library. This also uses a serial port, but on the PC side you can use html pages to create a graphical user interface very easily. For writing to the SD cards, I put together a little adapter card that includes the SD-Card connector and a real time clock chip, which is just about ready for going into distribution. It will include some basic example code for writing to the card in a FAT16 file system so it can be read on the PC directly. Best regards Robert On 14.11.2004, at 08:06, reeseshad wrote: > Hi, > > I'm just starting with the DSP56F827EVM, and I am wondering which > development software should I start with the SDK or CodeWarrier? > > My overall goal is to read from the ADC channels and store the results > on a SD card (external compactFlash) using SPI to transfer the data. > > Once I have that down I would like to use JTAG to change the sampling > rate of the ADC from a laptop. > > I know it a lot of work, but any help (examples and stuff)on what's > the best way to start would be appreciated. > > Regards, > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the > author of this message will receive your answer. You need to do a > "reply all" if you want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: > > To Post: > > To Leave: > > Archives: http://www.yahoogroups.com/group/motoroladsp > > More Groups: http://www.dsprelated.com/groups.php3 > > Yahoo! Groups Links > > |