AW: wireless bootloader

Started by Bende Georg May 10, 2005
My suggestion would be to use some kind of serial transmission and a customised boot loader
- flashing over wireless link through JTAG seems to be a bit too complicated for me.

Georg Bende > -----Ursprgliche Nachricht-----
> Von: motoroladsp@moto...
> [mailto:motoroladsp@moto...] Im Auftrag von Thomas
> Gesendet: Donnerstag, 5. Mai 2005 15:51
> An: motoroladsp@moto...
> Betreff: [motoroladsp] wireless bootloader > I guess I should of asked this question first but as anyone
> sucessfully sent a srec file over a wireless link? my DSP is
> going to
> be enclosed and I do not want to have to take it apart every time I
> modify the DSP code. eventually I'll probably just flash with jtag
> when firmware is finished but as of now its a pain because the board
> is inside the robot. I'm currently using bluetooth wireless radios
> which should be fast enough but I know there is a huge (occasional)
> lag time between bursts. so far when i tried it i got
> checksum error,
> and timeout error.
> Thanks,
> Thomas >
> ------------------------ Yahoo! Groups Sponsor
> --------------------~-->
> What would our lives be like without music, dance, and theater?
> Donate or volunteer in the arts today at Network for Good!
> --------------------------
> ------~- >