new member
starting to work with these DSP 56F8013, i am used to work with
codewarrior for microcontrolers, but working with DSPs is a little
different.
I would like to ask you, does anyone know where to find exemples in
asm or pure c for these DSPs, because most of all in at freescale
website are in PE, and as I am to learn the structure with PE it does
not seem to be a easy task, for example is that possible to define
GPIO as I define at codewarrior for microcontroler, and access it as a
variable?
like GPIO = 0X0001; for example.
for microcontroler i define in this way
unsigned volatile GPIO @address but in codewarrior 7.1 it is not
possible.
thanks in advance.
From: edriano2000 [mailto:e...@stptel.com.br]
Sent: Thursday, September 29, 2005 8:57 AM
To: m...@yahoogroups.com
Subject: [motoroladsp] new member
Hello all, my name is edriano, i am an electronic engineer and i am
starting to work with these DSP 56F8013, i am used to work with
codewarrior for microcontrolers, but working with DSPs is a little
different.
I would like to ask you, does anyone know where to find exemples in
asm or pure c for these DSPs, because most of all in at freescale
website are in PE, and as I am to learn the structure with PE it does
not seem to be a easy task, for example is that possible to define
GPIO as I define at codewarrior for microcontroler, and access it as a
variable?
like GPIO = 0X0001; for example.
for microcontroler i define in this way
unsigned volatile GPIO @address but in codewarrior 7.1 it is not
possible.
thanks in advance.
The information contained in this message is confidential and intended only for use of the designated recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this message in error, and that any review, dissemination, distribution, copying, or alteration of this message is strictly prohibited. If you have received this communication in error, please notify the originator immediately and remove it from your system.
From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf Of edriano2000
Sent: Thursday, September 29, 2005 8:57 AM
To: m...@yahoogroups.com
Subject: [motoroladsp] new member
starting to work with these DSP 56F8013, i am used to work with
codewarrior for microcontrolers, but working with DSPs is a little
different.
I would like to ask you, does anyone know where to find exemples in
asm or pure c for these DSPs, because most of all in at freescale
website are in PE, and as I am to learn the structure with PE it does
not seem to be a easy task, for example is that possible to define
GPIO as I define at codewarrior for microcontroler, and access it as a
variable?
like GPIO = 0X0001; for example.
for microcontroler i define in this way
unsigned volatile GPIO @address but in codewarrior 7.1 it is not
possible.
thanks in advance.