Problem with C6713's McBSP interfacing with an I2S CODEC

Started by Jessecw in comp.dsp10 years ago 1 reply

Hi All, I am going to connect an audio CODEC with C6713. And the CODEC has no DSP mode. So I want to use McBSP as an I2S bus. ...

Hi All, I am going to connect an audio CODEC with C6713. And the CODEC has no DSP mode. So I want to use McBSP as an I2S bus. Here are parts of my schematic. DSP C6713: CODEC: CLKX1----------+ +------------MCLK (bit clock signal) CLKR1----------+ FSX1-----------+ +------------LRCK ...


question on DSP book by Rulph Chassaing

Started by Mon in comp.dsp12 years ago 1 reply

Hi All, Recently I have purchased a book by Rulph Chassaing, "Digital Signal Processing and Applications with the C6713 and C6416 DSK". The book...

Hi All, Recently I have purchased a book by Rulph Chassaing, "Digital Signal Processing and Applications with the C6713 and C6416 DSK". The book comes with a CD with all the codes which the book refers to. My question is the entire book refer to C6713 and special file "dskC6713_init.c", however there is no C6713 support on CD but there is C6711 code on CD. Am I missing something? Thanks, M...


RE: Cannot start TI CCS 3.10 Platinum EVAL with SD 'C6713 DSK (board v. 2)

Started by dafty in comp.dsp12 years ago 3 replies

Dear all, I am an EE Graduate Student working with a C6713 DSK. I'm currently having problems getting my 'C6713 DSK to work with the latest...

Dear all, I am an EE Graduate Student working with a C6713 DSK. I'm currently having problems getting my 'C6713 DSK to work with the latest edition of CCS (3.10 PE). I've installed the latest Spectrum Digital CCS 3.1 Platinum Emulation Drivers (release 3.01.04) from the SD support site (http://emulators.spectrumdigital.com/c6000/), but am still having no luck :(. I get the following err...


Which book to follow for learning c6713

Started by commengr in comp.dsp9 years ago 4 replies

Hello, I want to learn to use Texas Instruments DSP c6713 and I have heard that Dr. Rulph Chassaing's book on it is best (DSP with applications...

Hello, I want to learn to use Texas Instruments DSP c6713 and I have heard that Dr. Rulph Chassaing's book on it is best (DSP with applications to c6713 & c6416) Now, my question is that, there ar two editions of the book First one is written by Dr. Chassaing himself Second edition is written by another author after Dr. Chassaing's death, using excerpts from the first edition. The auth...


C6713

Started by Anonymous in comp.dsp3 years ago 2 replies

Using an old TMS320 C6713 DSK which has two Ain and two A out. Works brilliantly but I am led to believe that it is a bit old. Is there a newer...

Using an old TMS320 C6713 DSK which has two Ain and two A out. Works brilliantly but I am led to believe that it is a bit old. Is there a newer DSK - same spec ie floating point but faster? I know the TMS320C6713B is pin compatible but I am not going to swap them as their is no socket.


New book on DSP Applications with C6713/C6416 DSK

Started by Rulph Chassaing in comp.dsp13 years ago 2 replies

Announcing my new book (scheduled for publication on November 19): "Digital Signal Processing with the C6713 and C6416 DSK," Wiley, 2005. The...

Announcing my new book (scheduled for publication on November 19): "Digital Signal Processing with the C6713 and C6416 DSK," Wiley, 2005. The C6713 DSK has replaced the C6711 DSK. Some new features of my new book compared with my previous book based on the C6711 DSK: * There are 105 programming examples (as opposed to 76) * New Chapter on DSP/BIOS and Real-Time Data Exchange (RTDX) * Very...


Hands-on 1-day workshop on C6713/C6416

Started by Anonymous in comp.dsp13 years ago 1 reply

Hi: I will be teaching a 1-day (on February 17) hands-on workshop on the C6713/C6416 DSK at TI's Annual Conference in Houston, Texas...

Hi: I will be teaching a 1-day (on February 17) hands-on workshop on the C6713/C6416 DSK at TI's Annual Conference in Houston, Texas February 15-17. Fee for workshop is $340 and INCLUDES both a DSK and a copy of my newest book: Digital Signal Processing and Applications with the C6713 and C6416 DSK". This workshop is primarily intended for Faculty members. Rulph Chassaing


C6713 Chassaing Code - Cannot Build and Run Examples

Started by BobM in comp.dsp12 years ago 3 replies

I have a C6713 DSK and the Chassaing C6713 book. I followed the instructions in the book for building the basic sine8_LED example. It builds...

I have a C6713 DSK and the Chassaing C6713 book. I followed the instructions in the book for building the basic sine8_LED example. It builds fine and I can load the output (.out file) to the DSK. However, when running it there is no 1kHz tone. But if I load the compiled sine8_LED.out file that came on the CD with the book, the DSK produces the 1 kHz tone as expected. It seems the DSK mig...


Power issue connecting a C6713 DSK & Cypress FX2LP via I2C

Started by colin in comp.dsp10 years ago

Hello, I'm experimenting troubles connecting a C6713 DSK board to a Cypress FX2LP chip (Eval board) through I2C. The C6713 I2C module 0 is...

Hello, I'm experimenting troubles connecting a C6713 DSK board to a Cypress FX2LP chip (Eval board) through I2C. The C6713 I2C module 0 is configured as a slave receiver, and the Cypress chip as Master transmitter, with a clock at 100kHz. 7bit addressing is used. Two pullup resistors of 2,2kohm are set on the SCL0 and SDA0 lines, as recommanded by the Cypress FX2P doc. And the GNDs of th...


Seeking Consultant / Contract Help w/ TI C6713 DSK and Code Composer

Started by Bill Foote in comp.dsp9 years ago

Need expert with in-depth experience using TI's C6713 DSK and miscellaneous compatible EVMs. Also desire experience with adaptive control,...

Need expert with in-depth experience using TI's C6713 DSK and miscellaneous compatible EVMs. Also desire experience with adaptive control, active noise cancellation, and related algorithms. Preferred in San Diego area. Please respond directly to bfoote@visionmetrics.com


C6713 and SDRAM

Started by eeh in comp.dsp12 years ago 6 replies

Hi, Recently I have a DSP project in which TMS6713BPYP is used. I have problem to interface the C6713 to the 16 bit SDRAM HY57V16160E. The...

Hi, Recently I have a DSP project in which TMS6713BPYP is used. I have problem to interface the C6713 to the 16 bit SDRAM HY57V16160E. The CCS always prompt a message soemthing like "Please verify target memory and memory map". I am quite sure that it is not software problem as the program can be loaded to the DSK6713. Could anyone check for me whether the following connections correct? ...


Looking for expert with lots of experience on TI c6713

Started by John Smith in comp.dsp9 years ago

We are looking for expert with lots of experience on TI c6713. (experience with other DSPs is not enough for us.) Please sent your CV and cover...

We are looking for expert with lots of experience on TI c6713. (experience with other DSPs is not enough for us.) Please sent your CV and cover letter to StratWiz_AT_gmail_DOT_com (remove all underlines and replace AT and DOT) Thanks JS


Interfacing C6713 DSK

Started by Bakari in comp.dsp11 years ago

I need to interface the C6713 DSK to my own daugter board. In doing that, I will need ECLKOUT which I will use to drive the logics in my daugter...

I need to interface the C6713 DSK to my own daugter board. In doing that, I will need ECLKOUT which I will use to drive the logics in my daugter board (EMIF). How can I get this signal out of the SDK. I expected that this signal is available as soon as the DSP is ready. Thanks for your help. Bakari


Used TMS320 C6713 DSP Starter Kit (DSK) for sale to UK only

Started by guil...@gmail.com in comp.dsp10 years ago

Hi Guys, I have one used C6713 DSK board for sale to UK only. You can get more information from my ebay...

Hi Guys, I have one used C6713 DSK board for sale to UK only. You can get more information from my ebay listing. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=170134025382&ssPageName=STRK:MESE:IT&i h=007 Many thanks ! My apology to uninterested party Regards, geniusbb


malloc

Started by Simone Winkler in comp.dsp13 years ago 28 replies

Hello, I'm developping code for a C6713 DSP (actually it's the D.SignT-module with the C6713 on it). I'm trying to use malloc() but it...

Hello, I'm developping code for a C6713 DSP (actually it's the D.SignT-module with the C6713 on it). I'm trying to use malloc() but it doesn't seem to work. In the beginning I always received a null pointer. After a long while of searching my mistake I detected the section in the DSP/BIOS configuration for malloc(). I pointed it to SBSRAM and to SDRAM but both solutions didnt work - in...


dskinit code

Started by bashee in comp.dsp12 years ago 3 replies

Hello there, can any one post the inicialization code of the C6713 DSK "...dskinit.c" that comes with the book "Digital Signal Processing and...

Hello there, can any one post the inicialization code of the C6713 DSK "...dskinit.c" that comes with the book "Digital Signal Processing and Applications with the C6713 and C6416 DSK" by Rulph Chassaing. I don't have the cd because I lost my laptop with the cd and all the code that I made. Now I have to do everthing again... Thanks a lot. This message was sent using the Comp.DSP web int...


C6713

Started by Haguemonster in comp.dsp9 years ago 1 reply

Hi there, I personally would recommend the C6713 as I used it to learn developing code on a TI platform. There's a good book on it by Rulph...

Hi there, I personally would recommend the C6713 as I used it to learn developing code on a TI platform. There's a good book on it by Rulph Chassaing : http://www.dsprelated.com/books/238.php The book has some good introductory projects (filtering, decimation etc...) and also has a chapter dedicated to some more involved projects which can test the knowledge you've gained in the previous ch...


ccs 3.1 with c6713 dsk kit

Started by chinny in comp.dsp5 years ago 1 reply

hi, i just started doing projects related to c6713. whaen i start do some small c programs, i am getting this after running it. can some...

hi, i just started doing projects related to c6713. whaen i start do some small c programs, i am getting this after running it. can some body help me to sort out this problem. Hope, some experts had met this kind of difficulties and sorted out easily. kindly, suggest some options to devlop my carrier with dsp. Trouble running Target CPU: *** Runtime error at PC = 01800014 Resour...


TI C67xx pipeline question

Started by Rene Kellenbach in comp.dsp14 years ago 2 replies

I am trying to optimize the inner loop of a filter algoritmn written in C/C++, using Code Composer 2.21 and a TI C6713 target system. After...

I am trying to optimize the inner loop of a filter algoritmn written in C/C++, using Code Composer 2.21 and a TI C6713 target system. After trying several optimizing techniques, the compiler generates to following loop kernel - see below. This code seems pretty good to me: the compiler generates 2 ADD's and 2 MPY's for almost every block of parallel instructions - this is the best a C6713 ...


I2C on C6713 board.. URGENT help req

Started by varundaya in comp.dsp12 years ago

Dear all, I am currently using a c6713 dsk and trying to implement altering the camera settings of a CMOS c3088 camera module via the I2C module...

Dear all, I am currently using a c6713 dsk and trying to implement altering the camera settings of a CMOS c3088 camera module via the I2C module of the 6713 i cannot seem to get a clock even after setting the appropriate regs, including the ISR, MST and so on also, as far as i know the clock should be high when there is no data being transmitted.. am i right? Currently i have set up the mo...