DD and DTS licences for the 563xx

Started by larry_fuse in Freescale DSPs13 years ago 4 replies

Hi everyone None of my dealers can tell me how to get information on the way the Dolby Digital and DTS licensing works for the 563xx Audio...

Hi everyone None of my dealers can tell me how to get information on the way the Dolby Digital and DTS licensing works for the 563xx Audio family. Thanks for your help Larry


563xx C-compiler

Started by jierchen in Freescale DSPs15 years ago 4 replies

Hello: I am new to this group. I have few questions regarding replacing 56002 with 563xx. 1. Is 'tasking' my only...

Hello: I am new to this group. I have few questions regarding replacing 56002 with 563xx. 1. Is 'tasking' my only choice for cross-compiler? 2. How much I am expecting to pay? 3. Any pre-warning would be helpful Thank you J


563xx gcc sources

Started by Stefan Stenzel in Freescale DSPs12 years ago

Moin, Recently I proposed to change gcc for 563XX by modifying the sources, now I realize I am not sure if those are already out...

Moin, Recently I proposed to change gcc for 563XX by modifying the sources, now I realize I am not sure if those are already out there. Reason I write is because I have these, some guy from Motorola sent it to me long time ago. I got them to compile under windows, but gave up modifying/improving it because I figured out this is nothing for a quick and dirty hack. So if anyone wants ...


563xx SCI port

Started by wygonski in Freescale DSPs16 years ago

I need to transmit a block of 24-bit words via interrupt-driven SCI of 563xx. User manual says that I can efficiently unpack and...

I need to transmit a block of 24-bit words via interrupt-driven SCI of 563xx. User manual says that I can efficiently unpack and transfer the 3-bytes comprising the word to the SCI Transmit Register (STX) by writing to STXL, STXM, and STXH. What I'd like to do in my ISR is to


563xx Flash Boot / Image creation

Started by xelarep in Freescale DSPs16 years ago 1 reply

I want to create a flash/eeprom image for the 563xx series. As far as I can see the internal bootloader only sets up the internal...

I want to create a flash/eeprom image for the 563xx series. As far as I can see the internal bootloader only sets up the internal p-RAM. So I have to copy the contents of x and y-RAM in the init phase of my application. I can generate p-,x-,y- only files with srec.exe. Then I have to


AN2715 Porting 56300 to SC140 application note

Started by Barr...@BT in Freescale DSPs15 years ago 1 reply

When will the 563xx be made obsolete.

When will the 563xx be made obsolete.


Betr.: Re: 563xx C-compiler

Started by Remko Galama in Freescale DSPs15 years ago 1 reply

Why not use the trial version of metrowerks? Size is limited (16kB) but it will get you started for free. Remko >>>...

Why not use the trial version of metrowerks? Size is limited (16kB) but it will get you started for free. Remko >>> dbaudiopro <> 16-02-05 8:34 >>>


source code for assembler linker

Started by Anonymous in Freescale DSPs15 years ago

HEllo all, I try to get a gcc assembler / linker for the DSP 563xx family. Do someone know one?? with regards tom ...

HEllo all, I try to get a gcc assembler / linker for the DSP 563xx family. Do someone know one?? with regards tom


Where to fing g563c

Started by Kate Alhola in Freescale DSPs17 years ago 2 replies

Suite 56k documentation says "From its website, Motorola distributes these enhanced, optimizing,GNU C compilers" I have tried...

Suite 56k documentation says "From its website, Motorola distributes these enhanced, optimizing,GNU C compilers" I have tried to find one unsuccesfully. Where to find 563xx c-compiler ? Kate -- +====================================================


563xx: How to generate P/Y/X memory occupation separately from .abs/cls tasking output

Started by dome...@st.com in Freescale DSPs14 years ago 1 reply

Hi to all, I'm a beginner in DSP programming. I need to have separately P/X/Y image of my 56300 derivative application because it does not...

Hi to all, I'm a beginner in DSP programming. I need to have separately P/X/Y image of my 56300 derivative application because it does not fit the internal Pram dimension and I want to rearrange it using also an external SRAM. To do this I'm developping a serial bootloader to parse P/X/Y image and


Chirp-Z transform algorithm for 563xx

Started by sfol...@iupui.edu in Freescale DSPs12 years ago

Has anyone ever ran across a CZT (Chirp-Z Transform) algorithm for a Motorola 56311 (or similar). I am wanting to nest an FFT in the CZT, so that...

Has anyone ever ran across a CZT (Chirp-Z Transform) algorithm for a Motorola 56311 (or similar). I am wanting to nest an FFT in the CZT, so that I can narrow the spectrum and dump the fundamental into a "bin" Thanks, Sean Foley


AW: AW: 563xx Flash Boot / Image creation

Started by Bende Georg in Freescale DSPs16 years ago

Sorry, I was wrong; I thought it is 56F83xx because it was written that he wants to read the flash memory. There's no CW for this...

Sorry, I was wrong; I thought it is 56F83xx because it was written that he wants to read the flash memory. There's no CW for this processor IMHO. Georg Bende Softwareentwickler Abteilung Elektronik Dr. Fritz Faulhaber GmbH & Co KG Daimlerstr. 23 71101 Sch


MATLAB blockset for DSP56807 ?

Started by Amol Sawant in Freescale DSPs17 years ago 1 reply

I have seen MATLAB R12 ver 6 having toolbox for Motorola DSP 56K series. But this contains only function for 563xx & 566xx which are...

I have seen MATLAB R12 ver 6 having toolbox for Motorola DSP 56K series. But this contains only function for 563xx & 566xx which are 24 bit DSP's, There is nothing on 568xx series which I feel is being widely used all over? Does any one know of any such facility available in mat


[563xx] Accessing struct members from assembler?

Started by martinegholmnielsen in Freescale DSPs11 years ago

Hi there, Is there a way to use members of a C struct in my (inline) assembler code? I would like to avoid hard coding the offsets of...

Hi there, Is there a way to use members of a C struct in my (inline) assembler code? I would like to avoid hard coding the offsets of elements? I don't want to have to change the assembler every time the struct is changed... This is for the DSP563xx family and the TASKING as563.exe v3.6r1... // Egholm


AW: 563xx Flash Boot / Image creation

Started by Bende Georg in Freescale DSPs16 years ago 2 replies

You can set up Codewarrior to generate S-Record file for you; then you can upload this file with the flash_over_jtag utility. This...

You can set up Codewarrior to generate S-Record file for you; then you can upload this file with the flash_over_jtag utility. This file includes all code that was generated. Georg Bende Softwareentwickler Abteilung Elektronik Dr. Fritz Faulhaber GmbH & Co KG


Motorola 56K and 563xx EVMS for sale

Started by Christopher Moore in Freescale DSPs16 years ago

Sorry if this offer for sale is not acceptable group protocol. If it is acceptable, here's what I have for sale -- $150...

Sorry if this offer for sale is not acceptable group protocol. If it is acceptable, here's what I have for sale -- $150 EVM56307 with most or all accessories $200 EVM56L307 with most or all accessories $100 EVM56002 with most or all accessories All are in normal w


FFT for DSP563xx: dynamic range

Started by wygonski in Freescale DSPs16 years ago 2 replies

Can anyone give me some guidance on the dynamic range of signals that I can process with an FFT on the 563xx? Here's my situation: ...

Can anyone give me some guidance on the dynamic range of signals that I can process with an FFT on the 563xx? Here's my situation: I have a 24-bit A/D, and I am doing synchronous averaging in the time domain, followed by the single-precision FFT. My record size and FFT size is


563xx address trace mode

Started by rathben in Freescale DSPs17 years ago 1 reply

I want to use address trace mode on the 56321 and 56303 so that I can watch internal Pmem fetches with a logic analyzer. I would...

I want to use address trace mode on the 56321 and 56303 so that I can watch internal Pmem fetches with a logic analyzer. I would like to use the logic analyzer in a mode where it is clocked from the DSP. Is there any signal from the DSP that I could use for this?


DSP board

Started by Henry Wijaya in Freescale DSPs19 years ago 1 reply

Hi people, I wanted to expand the external memory on the 563xx EVM boards, but it doesn't seem possible since the EVM boards don't...

Hi people, I wanted to expand the external memory on the 563xx EVM boards, but it doesn't seem possible since the EVM boards don't have any memory expansion connectors. So I was thinking of building a whole new DSP board just by 'following' the EVM's schematics and add as much external


RE: Which is the best DSP chip for audio processing ?

Started by Ebersman, Howard in Freescale DSPs15 years ago 3 replies

With respect to Motorola, the 568xx family is most cost effiect for 16 bit signal processing, while the 563xx is generally...

With respect to Motorola, the 568xx family is most cost effiect for 16 bit signal processing, while the 563xx is generally better for 24 bit processing.