So I got an reply from ADI. There is a patch for this problem. Quote: "After installing VisualDSP++ 3.0 service pack, please install the latest patches for VisualDSP++ 3.0 SP1 (HH2116x_Loader_2.0.3.24_20030910.zip and HH2116x_Loader_2.0.3.24_ReleaseNote.doc) which are available for download at the following location of our website: ftp://ftp.analog.com/pub/tools/patches " hh_ca --- h h <> wrote: > I just found out that those two lines are the two > variables at address 0x0c000000 and 0x0c000001. > These > are external memory addresses. There was a warning > during the project building process saying external > memory using 32 bits (or something to that effect). > This is definitely something new in versin 3.0. > > hh_ca > > --- h h <> wrote: > > I am using VisualDsp++ version 3.0 with service > pack > > 1. When producing loader file with SPI 32 bit > > hostwidth, I got two lines which are very weired: > > See > > the following line 6,7. Anybody has this problem? > > > > > > 0x40bfb05b > > 0x40bf8345 > > 0x00000002 > > 0x0c000000 > > 0x00000005 > > 0x00000x00000000 > > 0x00000x00000000 > > 0x00000000 > > 0x00000000 > > 0x00000000 > > 0x00000000 > > 0x00000b3e > > 0x00000000 > > 0x00000000 > > 0x00000000 > > > > Thanks! > > > > hh_ca > > > > __________________________________ > > > > > > _____________________________________ > > Note: If you do a simple "reply" with your email > > client, only the author of this message will > receive > > your answer. You need to do a "reply all" if you > > want your answer to be distributed to the entire > > group. > > > > _____________________________________ > > About this discussion group: > > > > To Join: Send an email to > > > > > > To Post: Send an email to > > > > To Leave: Send an email to > > > > > > Archives: http://groups.yahoo.com/group/adsp > > > > Other Groups: > http://www.dsprelated.com/groups.php3 > > > > > > ">http://docs.yahoo.com/info/terms/ > > > > __________________________________ > > _____________________________________ > Note: If you do a simple "reply" with your email > client, only the author of this message will receive > your answer. You need to do a "reply all" if you > want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > To Post: Send an email to > > To Leave: Send an email to > Archives: http://groups.yahoo.com/group/adsp > > Other Groups: http://www.dsprelated.com/groups.php3 > ">http://docs.yahoo.com/info/terms/ __________________________________ |
slower peripherals
Started by ●September 12, 2003
Reply by ●September 16, 20032003-09-16