Hi Everbody,
I am going to use BF532 and I will need Emulator ...
But it's expensive you know...
I have JTAG Cable that I used in my previous project to program my CPLD.
Shortly I have XILINX JTAG Program cable...
I want to clear that ;
Can I use this XILINX JTAG cable to emulate BF532 with adding any connection
and/or modification ???
Is this possible??
Thank you in advance ....
EAD
Emulation over XILINX JTAG Cable
Started by ●September 5, 2006
Reply by ●September 5, 20062006-09-05
On Tue, 5 Sep 2006 e...@yahoo.com wrote:
> Hi Everbody,
>
> I am going to use BF532 and I will need Emulator ...
> But it's expensive you know...
> I have JTAG Cable that I used in my previous project to program my CPLD.
> Shortly I have XILINX JTAG Program cable...
> I want to clear that ;
>
> Can I use this XILINX JTAG cable to emulate BF532 with adding any connection and/or modification ???
> Is this possible??
>
> Thank you in advance ....
I'm going to guess no, it won't work. But it's worth a try!
Patience, persistence, truth,
Dr. mike
> Hi Everbody,
>
> I am going to use BF532 and I will need Emulator ...
> But it's expensive you know...
> I have JTAG Cable that I used in my previous project to program my CPLD.
> Shortly I have XILINX JTAG Program cable...
> I want to clear that ;
>
> Can I use this XILINX JTAG cable to emulate BF532 with adding any connection and/or modification ???
> Is this possible??
>
> Thank you in advance ....
I'm going to guess no, it won't work. But it's worth a try!
Patience, persistence, truth,
Dr. mike
Reply by ●September 10, 20062006-09-10
Hi.
First, you can not use Xilinx DLC from VDSP. But there is gdbproxy
which interface gdb debugger and your DLC. It is destributed from
http://blackfin.uclinux.org.
I have tried to download gcc's output file through the EZ-KIT's usb
cable. It works well. So, it may be worth to try download VDSP's dxe
file through gdb.
Regards,
Suikan
First, you can not use Xilinx DLC from VDSP. But there is gdbproxy
which interface gdb debugger and your DLC. It is destributed from
http://blackfin.uclinux.org.
I have tried to download gcc's output file through the EZ-KIT's usb
cable. It works well. So, it may be worth to try download VDSP's dxe
file through gdb.
Regards,
Suikan