Tiger sharc TS201 EPROM Boot

Hi Members

Iam new to Tigersharc TS201 processor.
I have gained some knowledge using Tiger sharc TS201 EZ-lite kit.

Now,

Iam designing a board with a Tiger sharc TS201 Processor
I have connected the BMS Pin of TS201 to the FLASH.
I need to do the PROM boot from the FLASH.
(just to execute the code that boot the processor)

My queries

1. From the Evaluation kit i have the code TS201_prom.asm. Can i use
this same code for my project to boot the TS201 using Flash ? If not
wht to use and how to produce bootdata.ldr ?

2. How to produce bootdata.ldr file from TS201_prom.asm ??

3. How to convert the produced bootdata.ldr into some BIN file so that
i can use the bin file to load to flash ??

Very grateful if u answer my above queries.

Thanks
Mahendran Start a New Thread

On Thu, 26 Apr 2007, raja_mahendra10 wrote:

>
> Hi Members
>
> Iam new to Tigersharc TS201 processor.
> I have gained some knowledge using Tiger sharc TS201 EZ-lite kit.
>
> Now,
>
> Iam designing a board with a Tiger sharc TS201 Processor
> I have connected the BMS Pin of TS201 to the FLASH.
> I need to do the PROM boot from the FLASH.
> (just to execute the code that boot the processor)
>
> My queries
>
> 1. From the Evaluation kit i have the code TS201_prom.asm. Can i use
> this same code for my project to boot the TS201 using Flash ? If not
> wht to use and how to produce bootdata.ldr ?
>
> 2. How to produce bootdata.ldr file from TS201_prom.asm ??
>
> 3. How to convert the produced bootdata.ldr into some BIN file so that
> i can use the bin file to load to flash ??
>
> Very grateful if u answer my above queries.

I actually don't know, but if you check this web page:
http://search.analog.com/DSPKB/search.aspx?QT=boot%20loader&Locale=en

there are 2 possible EE's from ADI which explain it. EE-200 and EE-174
look useful.

Patience, persistence, truth,
Dr. mike Start a New Thread