|
hi
>Does somebody know how can I simulate a SPORT0 Tx within VDSP2.0 for 21xx? Perhaps the html help was not precise, >niether complete. firat of all if u are trying to run both simulation and kit, u may not run simulation as it prompt for some validation code. you can simulate SPORT0 in ADSP2.0 for
21xx. Goto settings ->streams... and then set the source and
destination parameters.
The example given by C:\Program Files\Analog
Devices\VisualDSP\218x\Examples\example2 is a good example for simulating
SPORT1. U can apply it to SPORT0(i have not tried it but it will
work).
regards
M. Shehzad Hanif
|
Re: VisualDSP++ 2.0 for 21XX
Started by ●May 3, 2001
Reply by ●June 25, 20012001-06-25
|
Hi guys: Does somebody know how can I simulate a SPORT0 Tx within VDSP2.0 for 21xx? Perhaps the html help was not precise, niether complete. And with a 21xx EzKit Lite attached to the serial port of my PC? Thanks. Jaime Andr Aranguren Cardona |
|
|
Reply by ●June 26, 20012001-06-26
|
Hi ,
Plz look at the
example2 in your examples folder it simulates Serila port TX and RX0.
| |||
| |||
| |||
|
README.Sport Example ADSP-2181 Sport Program This directory contains an example Sport for use with the ADSP-2181 Development Software. Files contained in this directory: SPORT.ASM ADSP-2181 source for an Serial Port example. ADSP-2181.LDF Linker description file (system description) for Serial Port example EXAMPLE2.DPJ The VDSP project file for the Sport example. The Sport project is configured to produce a DXE file named Sport.dxe. SERIN.DAT Input data file to be transferred through serial port. | |||
| |||
| |||
|
