Problem with ADSP21262 JTAG Interface
Started by ●January 25, 2010
I have designed a custom board with ADSP21262 processor. The board has a JTAG
header. The ICE test passes correctly. But when I try to open the session, it
shows an erroe message. Please help me to solve out the problem..
Reply by ●January 25, 20102010-01-25
hi,
need to give info on VDSP settings. During session open ( i mean when you try to connect), what are the things are enabled?. If you send settings in detail, we can look at it and find possible cause for reported problem.
kind regards
jk
----- Original Message -----
From: m...@yahoo.co.in
To: a...
Sent: Monday, January 25, 2010 2:49 PM
Subject: [adsp] Problem with ADSP21262 JTAG Interface
I have designed a custom board with ADSP21262 processor. The board has a JTAG header. The ICE test passes correctly. But when I try to open the session, it shows an erroe message. Please help me to solve out the problem..
need to give info on VDSP settings. During session open ( i mean when you try to connect), what are the things are enabled?. If you send settings in detail, we can look at it and find possible cause for reported problem.
kind regards
jk
----- Original Message -----
From: m...@yahoo.co.in
To: a...
Sent: Monday, January 25, 2010 2:49 PM
Subject: [adsp] Problem with ADSP21262 JTAG Interface
I have designed a custom board with ADSP21262 processor. The board has a JTAG header. The ICE test passes correctly. But when I try to open the session, it shows an erroe message. Please help me to solve out the problem..
Reply by ●January 25, 20102010-01-25
What is the error message?
On Mon, 25 Jan 2010, m...@yahoo.co.in wrote:
> I have designed a custom board with ADSP21262 processor. The board has a JTAG header. The ICE test passes correctly. But when I try to open the session, it shows an erroe message. Please help me to solve out the problem..
>
On Mon, 25 Jan 2010, m...@yahoo.co.in wrote:
> I have designed a custom board with ADSP21262 processor. The board has a JTAG header. The ICE test passes correctly. But when I try to open the session, it shows an erroe message. Please help me to solve out the problem..
>
Reply by ●January 25, 20102010-01-25
Hi,
Follow suggestions from Mike and Dr. Jayakumar, and also beware of Operating System and version (and patches) of VDSP++ that you are using; also important tell which ICE are you using to acces the DSP via JTAG. There have been some threads about the topics on the Analog Devices' Engineering Zone http://ez.analog.com, a resource which is also worth visiting.
Regards,
Jaime Andrés Aranguren Cardona
j...@ieee.org
j...@computer.org
________________________________
Von: Dr Jayakumar Singaram
An: m...@yahoo.co.in; a...
Gesendet: Montag, den 25. Januar 2010, 17:35:12 Uhr
Betreff: Re: [adsp] Problem with ADSP21262 JTAG Interface
hi,
need to give info on VDSP settings. During session
open ( i mean when you try to connect), what are the things are enabled?. If you
send settings in detail, we can look at it and find possible cause for reported
problem.
kind regards
jk
----- Original Message -----
>From: meet_nivin@yahoo. co.in
>To: adsp@yahoogroups. com
>Sent: Monday, January 25, 2010 2:49
> PM
>Subject: [adsp] Problem with ADSP21262
> JTAG Interface
>
>
>I have designed a custom board with ADSP21262 processor. The board has a
> JTAG header. The ICE test passes correctly. But when I try to open the
> session, it shows an erroe message. Please help me to solve out the
> problem..
>
__________________________________________________
Follow suggestions from Mike and Dr. Jayakumar, and also beware of Operating System and version (and patches) of VDSP++ that you are using; also important tell which ICE are you using to acces the DSP via JTAG. There have been some threads about the topics on the Analog Devices' Engineering Zone http://ez.analog.com, a resource which is also worth visiting.
Regards,
Jaime Andrés Aranguren Cardona
j...@ieee.org
j...@computer.org
________________________________
Von: Dr Jayakumar Singaram
An: m...@yahoo.co.in; a...
Gesendet: Montag, den 25. Januar 2010, 17:35:12 Uhr
Betreff: Re: [adsp] Problem with ADSP21262 JTAG Interface
hi,
need to give info on VDSP settings. During session
open ( i mean when you try to connect), what are the things are enabled?. If you
send settings in detail, we can look at it and find possible cause for reported
problem.
kind regards
jk
----- Original Message -----
>From: meet_nivin@yahoo. co.in
>To: adsp@yahoogroups. com
>Sent: Monday, January 25, 2010 2:49
> PM
>Subject: [adsp] Problem with ADSP21262
> JTAG Interface
>
>
>I have designed a custom board with ADSP21262 processor. The board has a
> JTAG header. The ICE test passes correctly. But when I try to open the
> session, it shows an erroe message. Please help me to solve out the
> problem..
>
__________________________________________________