Hi,
I'm using the BF518 with ezkit eval board.
Can any one tell me how to enable / use the external sdram.
my application needs to store a 8Kbytes (or more), then I do some anlysis. I
think till now I used only the internal memory and everything worked ok. when
moving from 4 Kbytes to 8Kbytes my program failes. with the following
announcement in the dissassembly window.
" _unknown_exeption_occured
_idle
do_not_know_what_to_do "
as far as I understand, this is a memory problem - i tried to change the
"project options - memory usag - use internal sram and external sdram". but it
didn't help.
any ideas?