we have kept the reset pin normally floating. and after power up ,we are making
it HiGH to start the bootloader.
Does the controller reset by pulling the Reset Pin High or Low?
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video
Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
Reset pin Tms320f2812
Started by ●April 5, 2008
Reply by ●April 7, 20082008-04-07
hi
F2812 donot need any power sequence for power-up or power-down but you it must be see high edge of reset signal after full power-up.(SPRC174O-Section 6.9)
Amin
n...@gmail.com wrote:
we have kept the reset pin normally floating. and after power up ,we are making it HiGH to start the bootloader.
Does the controller reset by pulling the Reset Pin High or Low?
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
F2812 donot need any power sequence for power-up or power-down but you it must be see high edge of reset signal after full power-up.(SPRC174O-Section 6.9)
Amin
n...@gmail.com wrote:
we have kept the reset pin normally floating. and after power up ,we are making it HiGH to start the bootloader.
Does the controller reset by pulling the Reset Pin High or Low?
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
Reply by ●April 8, 20082008-04-08
Don't let this pin float.
Chao
--- AminRezaie ะด
> hi
> F2812 donot need any power sequence for power-up
> or power-down but you it must be see high edge of
> reset signal after full power-up.(SPRC174O-Section
> 6.9)
> Amin
>
> n...@gmail.com wrote:
> we have kept the reset pin normally
> floating. and after power up ,we are making it HiGH
> to start the bootloader.
>
> Does the controller reset by pulling the Reset Pin
> High or Low?
>
>
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
Chao
--- AminRezaie ะด
> hi
> F2812 donot need any power sequence for power-up
> or power-down but you it must be see high edge of
> reset signal after full power-up.(SPRC174O-Section
> 6.9)
> Amin
>
> n...@gmail.com wrote:
> we have kept the reset pin normally
> floating. and after power up ,we are making it HiGH
> to start the bootloader.
>
> Does the controller reset by pulling the Reset Pin
> High or Low?
>
>
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
Reply by ●April 8, 20082008-04-08
What is SPRC174O document....i am not able to find it on TI site.
we have kept the reset pin normally floating. and after power up ,we are making it HiGH to start the bootloader.
>
>Does the controller reset by pulling the Reset Pin High or Low?
>
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
we have kept the reset pin normally floating. and after power up ,we are making it HiGH to start the bootloader.
>
>Does the controller reset by pulling the Reset Pin High or Low?
>
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
Reply by ●April 9, 20082008-04-09
IS this to be kept high normally and then switch it to low on reset?
we have kept the reset pin normally floating. and after power up ,we are making it HiGH to start the bootloader.
>
>Does the controller reset by pulling the Reset Pin High or Low?
>
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
we have kept the reset pin normally floating. and after power up ,we are making it HiGH to start the bootloader.
>
>Does the controller reset by pulling the Reset Pin High or Low?
>
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
