|
I wonder that when I modify the value of emif register value like CExCTL, what changes occur in DSP chip. Roughly, I know that the CExCTL is related to RD, WR, or CE signal. But, I want to know exact information about it. Please, explain about it. |
|
|
what is real effects by changing emif register?
Started by ●September 17, 2002
Reply by ●September 18, 20022002-09-18
|
Section 9.6 of the peripherals guide spru190c tell all (well, apart from
the errata, which is one the errata sheet :-) Martin -- Martin Thompson BEng(Hons) CEng MIEE TRW Conekt Stratford Road, Solihull, B90 4GW. UK Tel: +44 (0)121-627-3569 - >>> "heedongs" <> 17 September 2002 15:49:44 >>> I wonder that when I modify the value of emif register value like CExCTL, what changes occur in DSP chip. Roughly, I know that the CExCTL is related to RD, WR, or CE signal. But, I want to know exact information about it. Please, explain about it. _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c6x Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ |
Reply by ●September 18, 20022002-09-18
|
There is a updated document SPRU190D available on the website which incorporates the errata and adds a lot of additional info too if I recall correctly.... Paul -----Original Message----- From: Martin.J Thompson [mailto:] Sent: Wednesday, September 18, 2002 2:12 AM To: ; Subject: Re: [c6x] what is real effects by changing emif register? Section 9.6 of the peripherals guide spru190c tell all (well, apart from the errata, which is one the errata sheet :-) Martin -- Martin Thompson BEng(Hons) CEng MIEE TRW Conekt Stratford Road, Solihull, B90 4GW. UK Tel: +44 (0)121-627-3569 - >>> "heedongs" <> 17 September 2002 15:49:44 >>> I wonder that when I modify the value of emif register value like CExCTL, what changes occur in DSP chip. Roughly, I know that the CExCTL is related to RD, WR, or CE signal. But, I want to know exact information about it. Please, explain about it. _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c6x Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c6x Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ |
