|
TT the attched are 2 examples for dsk6711 codec operation. the two are used to generate 1k Hz sound via ad535 through roll and interrupt respectly. use its ad535 initianlization code,you can write you own program Weiguo Chen ----- Original Message ----- From: "ondal95" <> To: <> Sent: Friday, November 01, 2002 3:50 PM Subject: [c6x] What should I do for generating white noise using 6711dsk? > I am the Msc student in South Korea. > I try to know about the board. > Now I have a little knowledge about TMS320C6711dsk. > But, my technique is nearly zero. In other words, I have never control > hardware like 6711dsk. > How to connect the DSProcessor to McBSP, and what I should do > to operate the codec AD535. > If you have an example about this, please give me an example codes. > There is no reference to start with. > > How.... how can I control this expensive board? > > There are many data book and user mannual. But I cannot touch the > keybord with this mannual. > > T.T | |||
| |||
|
Re: What should I do for generating white noise using 6711dsk?
Started by ●November 1, 2001
Reply by ●November 1, 20022002-11-01
|
I am the Msc student in South Korea. I try to know about the board. Now I have a little knowledge about TMS320C6711dsk. But, my technique is nearly zero. In other words, I have never control hardware like 6711dsk. How to connect the DSProcessor to McBSP, and what I should do to operate the codec AD535. If you have an example about this, please give me an example codes. There is no reference to start with. How.... how can I control this expensive board? There are many data book and user mannual. But I cannot touch the keybord with this mannual. T.T |
|
|
