Hi All,
- I am porting Mpeg4 Codec to Davinci platform(DM6446). I build the
Mpeg4_decoder src to Mpeg4_decoder.lib in CCS. On CCS it was working fine
and the results are also perfect.
- Now I am trying to run the app on DM6446. It is halting everytime.
Below are the messages it is giving:
@0x00207e68:[T:0x4003a6e8] CV - VISA_call(visa=0x24850, msg=0x4094a900):
messag0
@0x00207f0d:[T:0x4003a6e8] OC - Comm_put> Enter(msgqQueue=0x2,
msg=0x4094a900)
@0x00207fc4:[T:0x4003a6e8] OC - Comm_put> return
(0)
@0x0020804a:[T:0x4003a6e8] OC - Comm_get> Enter(msgqQueue=0x10002,
msg=0xbefffa)
@0x0020811d:[T:0x411b7b60] CE - Engine_fwriteTrace(0x245e8, '[DSP]
',
0x4014279)
@0x002081fe:[T:0x411b7b60] CE - Engine_fwriteTrace(): requesting DSP trace
@0x2.
@0x002082a7:[T:0x411b7b60] OC - Comm_put> Enter(msgqQueue=0x0,
msg=0x40949900)
@0x00208366:[T:0x411b7b60] OC - Comm_put> return
(0)
@0x002083ef:[T:0x411b7b60] OC - Comm_get> Enter(msgqQueue=0x10001,
msg=0x411b75)
After this it will halt and need to reset.
I would be grateful if anyone out there had a solution.
Thanks & Regards,
Padma
_____________________________________
