Re: DSK6711 Interface

I understand that this post is very old but can i ask you how do you program the comunication trogh hpi? Could you help me suggsting me doc, code, your experience or something?
>
>
>
> Hi, I have some question about Interface DSK6711 to PC. As I know
>there are only two ways to interface DSK6711 to PC, One is LPT1
>using EPP mode and the other is JTAG which could use XDS510 or
>XDS560.
>
>I have problem that I want to send image frame(640x480) from DSK6711
>to PC. Currently, I am using the HPI via LPT1 to send one image
>frame to PC. But the speed is very slow (500 Kbytes/one image frame
>= 5-6 minutes). I have tried to solve the solution, I found that
>this problem could be solve by using XDS560 via RTDX which speed is
>2-3 MBytes hence could send image frame for real time maybe about 15
>fps. But this XDS560 is too expensive, I tried to find a low cost
>solution, cause my goal is not image acqusition, the image frame
>that I send to PC is only for debugging.
>
>Here is my question
>Is there any possibility to send one image frame to PC more than 500
>Kbytes by using EDMA. Cause I saw in the TI datasheet, the HPI could
>use EDMA to transfer data. I mean that Is there any possibility to
>improved the HPI speed by using EDMA.
>
>I have another problem related to the DSK6711 interface. I couldnt
>found Serial Communication (SCI) in DSK62xx/67xx family. Is it true
>that DSK62xx/67xx SCI Port is not in use anymore ?
>
>Thank you
>
>Henrry Andrian
>
>
>
>
>
>

_____________________________________ Start a New Thread

Franz-

> I understand that this post is very old but can i ask
> you how do you program the comunication trogh hpi? Could you
> help me suggsting me doc, code, your experience or something?

Is this a WinXP PC? If so suggest to try this link:

ftp://ftp.signalogic.com/software/DirectDSP_DSK/

The DirectDSP software also uses parallel port, but it uses EPP mode and is optimized, so it should be a lot faster
than the old TI software that came with the DSK C6711 (6 min for 500 kbytes sounds like a Turtle). My recollection is
that the host-hpi DLL that TI shipped out with the DSK C6711 for some reason did a lot of retries.

-Jeff

>> Hi, I have some question about Interface DSK6711 to PC. As I know
>>there are only two ways to interface DSK6711 to PC, One is LPT1
>>using EPP mode and the other is JTAG which could use XDS510 or
>>XDS560.
>>
>>I have problem that I want to send image frame(640x480) from DSK6711
>>to PC. Currently, I am using the HPI via LPT1 to send one image
>>frame to PC. But the speed is very slow (500 Kbytes/one image frame
>>= 5-6 minutes). I have tried to solve the solution, I found that
>>this problem could be solve by using XDS560 via RTDX which speed is
>>2-3 MBytes hence could send image frame for real time maybe about 15
>>fps. But this XDS560 is too expensive, I tried to find a low cost
>>solution, cause my goal is not image acqusition, the image frame
>>that I send to PC is only for debugging.
>>
>>Here is my question
>>Is there any possibility to send one image frame to PC more than 500
>>Kbytes by using EDMA. Cause I saw in the TI datasheet, the HPI could
>>use EDMA to transfer data. I mean that Is there any possibility to
>>improved the HPI speed by using EDMA.
>>
>>I have another problem related to the DSK6711 interface. I couldnt
>>found Serial Communication (SCI) in DSK62xx/67xx family. Is it true
>>that DSK62xx/67xx SCI Port is not in use anymore ?
>>
>>Thank you
>>
>>Henrry Andrian

_____________________________________ Start a New Thread