|
Hi All, Does anyone out there have any experience with the GPIO lines of the C6416 TEB? We have a customer trying to put a probe onto those lines and they need to know where they are available on the board. Unfortunately the only schematics I have do not load properly, which means that you cannot see all the sheets. From what I have been able to see I believe that GP4 - GP7 (DC_EINT4 to DC_EINT7) are available on the External Peripheral Interface (J1) as follows: DC_EINT4 ==> J1 - 53 DC_EINT5 ==> J1 - 48 DC_EINT6 ==> J1 - 67 DC_EINT7 ==> J1 - 68 Does anyone have a set of schematics for the C6416 TEB that open properly (I am using Acrobat Reader 5.0.5). Failing that does anyone have the locations of the other GPIO pins on the daughtercard interface? Thanks in advance for any help. Kevin Howson Technical Manager Kane Computing Ltd |
|
|
C6416 TEB Schematics
Started by ●January 27, 2003
Reply by ●January 28, 20032003-01-28
|
hi, I am fine, hoping the same with you too. I want to know what is pipeline stall.( when we open CCS on the menu column there is profiler, under which is present clock setup under this there is count dropdown menu in which is present pipeline stall) When I enable clock for pipeline stall I want to know what information the pipeline stall count will give. When I run the program using F5 having enabled the clock for pipeline stall I get 17520 count But when I run the program using only F8 (single step ) having enabled the clock for pipeline stall I get zero(0) count. I would like to know why. Thanking you MOS. ________________________________________________________________________ Missed your favourite TV serial last night? Try the new, Yahoo! TV. visit http://in.tv.yahoo.com |
