|
Hai friends,
I am new to 6711 board. I need to read 2 input using dsk6711/daughter
board. If i am using 1 input from onboard mike and one from daughter board i am
not getting daughter board pcm 3003 codec output.
If any one knows how to read 1 input from dsk and 1 from the daughter
board. pls. can help me and if u have any sample code for 2 mike inputs
using
1. stereo mike as separate using daughter board only
2. using 1 from dsk and 1 from the daughter board
regards
Raju
|
|
|
using 2 mike input from the daughter board using 6711
Started by ●July 31, 2003
SMS using the Yahoo! Messenger;
Download latest version.Reply by ●July 31, 20032003-07-31
|
> I am new to 6711 board. I need to read 2 input using > dsk6711/daughter board. If i am using 1 input from > onboard mike and one from daughter board i am not > getting daughter board pcm 3003 codec output. > If any one knows how to read 1 input from dsk and 1 > from the daughter board. pls. can help me and if u > have any sample code for 2 mike inputs > using > > 1. stereo mike as separate using daughter board only > 2. using 1 from dsk and 1 from the daughter board may sounds stupid, but you are using interrupts while trying to read those signals? also - think about the sampling rates of your codecs (AD535 and PCM3003) - as default they are not the same - I hope you're aware of all that... other than that - tell us more - are you using DSP/BIOS? __________________________________ |
