SDRAM failure

Most likely the version of the POST that is stored in the FLASH does not account for the EMIF settings of the SDRAM on the DSK ... but the confidence test you are running does have the correct settings.

Regards,
Tom Dillon

-----Original Message-----
From: Werner du Toit [mailto:s...@tuks.co.za]
Sent: Monday, October 20, 2003 7:37 AM
To: c...@yahoogroups.com
Subject: [c6x] SDRAM failure

When my C6711 DSK boots up, LED 2 remains on.  But when I do the conf test, everything seems to be working fine.  Is there a logical explanation for this?

Thanks in advance
Werner

_____________________________________
Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer.  You need to do a "reply all" if you want your answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join:  Send an email to c...@yahoogroups.com

To Post:  Send an email to c...@yahoogroups.com

To Leave: Send an email to c...@yahoogroups.com

Archives: http://www.yahoogroups.com/group/c6x

Other Groups: http://www.dsprelated.com
 

" TARGET="_blank">http://docs.yahoo.com/info/terms/