|
Mr Morrow I am interested in your winDSK6 solution from the aspect of how you download your code to the target. Do you use DSP/BIOS to develop your DSP code that is loaded over the HPI port ? I have developed a DSP program without DSP/BIOS and it loads fine onto the target over the HPI port using the dsk hpi drivers supplied. When I write the DSP code using DSP/BIOS the program does not operate when loaded to the DSK target. This is after testing and running directly under CCS. All this is a little strange and frustrating. BTW the easy I have included the RESET vector in the code, this was my first thought of fault. If you can help with a reason/solution I would be much appreciated. Best regards Darren Powierski |
Loading a DSP/BIOS program over the HPI port using DSK HPI drivers
Started by ●October 28, 2003
