Hello all I'm a grad student at UT, Arlington and have been working with the C6711 DSK for the past year. I have been reading up on McBSP based communication. I need some help with the EDMA part. I have read spra633a.pdf which talks about configuring the McBSP as a UART. There, the EDMA is configured to send and accept a single burst of data and halt. I read up on spru234 and spra636 to see how to implement the EDMA in a mode where it accepts data continuously. There is a provision to link the EDMA paramteres for any number of times, so it gets reloaded, till you finally link it to Null parameters to halt the loading. But the way that has been described(in documents spru234 and spra636), is very different from the way EDMA has been befined in spra636a. Is anyone familiar with the old style of EDMA definition? Can you suggest any documents I can read up on that? Thank you Sindy |
|
Help Please McBSP+EDMA
Started by ●January 16, 2004
Reply by ●January 16, 20042004-01-16
For an example, check out the audio example in the folder ti\examples\dsk6711\bios\audio - this is an example that uses EDMA and the McBSP to stream digital audio data through the codec. Thom -----Original Message----- From: sindy_555 [mailto:] Sent: Friday, January 16, 2004 9:33 AM To: Subject: [c6x] Help Please McBSP+EDMA Hello all I'm a grad student at UT, Arlington and have been working with the C6711 DSK for the past year. I have been reading up on McBSP based communication. I need some help with the EDMA part. I have read spra633a.pdf which talks about configuring the McBSP as a UART. There, the EDMA is configured to send and accept a single burst of data and halt. I read up on spru234 and spra636 to see how to implement the EDMA in a mode where it accepts data continuously. There is a provision to link the EDMA paramteres for any number of times, so it gets reloaded, till you finally link it to Null parameters to halt the loading. But the way that has been described(in documents spru234 and spra636), is very different from the way EDMA has been befined in spra636a. Is anyone familiar with the old style of EDMA definition? Can you suggest any documents I can read up on that? Thank you Sindy _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c6x Other Groups: http://www.dsprelated.com |