|
Hello,
I am having great problem with the C6211 dsk as i am not able to even start
with the kit.
i simply want's to take the input from a Function Generator -> i
have already written a program in the CCS for amplifying and one for filtering
it .Then -> i want to view the output on the Oscilloscope.
The main problem is my program is simply in "C" i am not aware of the
modification's and extra commands i have to include in my program while
interfacing the DSK kit with it.
I can even go for any assembly or Mnemonics coding .
Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.
Download now. |
|
|
Give me help regarding interfacing simply a dsk C6211 kit
Started by ●January 27, 2004
Reply by ●January 28, 20042004-01-28
|
--- gordhan rathore <> wrote: > I am having great problem with the C6211 dsk as i am > not able to even start with the kit. ;-) we all went through that at some point ;-) > i simply want's to take the input from a Function > Generator -> i have already written a program in the > CCS for amplifying and one for filtering it .Then -> > i want to view the output on the Oscilloscope. > > The main problem is my program is simply in "C" i > am not aware of the modification's and extra > commands i have to include in my program while > interfacing the DSK kit with it. ?? simply in C? well - I don't know what you mean by that... but let me ask you this - did you configure the DSP to work with the codec? (whatever codec you have there on your DSK?) if not - I'd start with that - try to talk to the codec (read a single sample at first) before you "filter anything" ;-) it may be necessary to learn something about the codec-DSP interface - is it serial? parallel? did you figure it out? after all - regardles what other people (TI marketing folks for example ;-) ) may have told you - there is a significant "learning curve" you'll have to go through - that's just the way it is ;-) good luck anyway... from snowy Stuttgart, Germany Wojciech Rewers __________________________________ |
Reply by ●January 29, 20042004-01-29
|
A few suggestions [I assume that your question is regarding performing I/O
operations]:
1. Check the tutorial and example directories of your DSK CCS
installation.
2. Check to see if your installation includes CSL [Chip Support
Library].
If not you may check TI's web site or these archives for CSL or BSL
references.
good luck.
mikedunn
gordhan rathore <b...@yahoo.co.in> wrote:
|
|
|
Reply by ●January 30, 20042004-01-30
|
any body please give me the links for
tutorial and example directories of your DSK CCS installation
Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.
Download now. |
Reply by ●January 31, 20042004-01-31
|
To YAPWDNSE and who it may concern,
It sounds like you are frustrated and need a solution now. I think
that you need to take a breath and think about your problem. To get
someone to assist you, you need to describe your situation in order to receive
assistance. Please answer the following questions if you still need
assistance:
1. Do you have CCS??
2. Do you know where it is installed on your system??
3. Can you select the install directory [defaults to c:\ti] in Windows
Explorer and find directories labeled 'tutorial' and
'examples'??
4. Do you have a different problem - like for some reason you do not have
the directories in question??
mikedunn
BTW, YAPWDNSE stands for "Yet Another Person Who Does Not Sign Their
Email".
gordhan rathore <b...@yahoo.co.in> wrote:
|
