Hi all,
When I compiled my program on evm642 using ccs 2.0, I suddenly got
this error.
"line 1: error: Version 4.90.270 is not compatible with this
version of BIOS. Please open this file in the Configuration Tool
and update."
Actually it is not the first time I compile that code. I compile
that code so many time without any problem and suddenly got this
error. May I know how to make the version compatible and how to open
configuration tool? Seem like I can't manage to find
the "configuration tool" in CCS editor. Thanks.
tnk
Reply by Mike Dunn●May 25, 20042004-05-25
Hello tnk,
It is not very obvious [until you find it]
With your project open look in the left pane for your ".cdb" file in a
folder labeled DSP/BIOS Config. Double click to open it and you should be
able to rebuild.
For those who are 'listening', this is a standard procedure if
you update your CCS software - you need to do it for each project that you
recompile.
mikedunn
t...@yahoo.com wrote:
Hi all, When I compiled my program on evm642
using ccs 2.0, I suddenly got this error. "line 1: error: Version
4.90.270 is not compatible with this version of BIOS. Please open this
file in the Configuration Tool and update." Actually it is not the
first time I compile that code. I compile that code so many time without
any problem and suddenly got this error. May I know how to make the
version compatible and how to open configuration tool? Seem like I
can't manage to find the "configuration tool" in CCS editor.
Thanks.
tnk
_____________________________________ Note: If you do a simple "reply" with your email client, only the author of
this message will receive your answer. You need to do a "reply all" if you want
your answer to be distributed to the entire group.
_____________________________________ About
this discussion group:
<*> To
visit your group on the web, go to: http://groups.yahoo.com/group/c6x/
<*> To unsubscribe from this group, send an email to: c...@yahoogroups.com
<*>
Reply by behcs●May 25, 20042004-05-25
Hi,
If not
mistaken, there's no way to "downgrade" the DSP/BIOS ".cdb" config file to
the previous / older
version. Perhaps you might want to backup your
works first.
Regards,
BehCS
----- Original Message -----
From: Mike Dunn
To: t...@yahoo.com ; c...@yahoogroups.com
Sent: Tuesday, May 25, 2004 12:12 PM
Subject: Re: [c6x] TI bios
Hello tnk,
It is not very obvious [until you find it]
With your project open look in the left pane for your ".cdb" file in a
folder labeled DSP/BIOS Config. Double click to open it and you should be
able to rebuild.
For those who are 'listening', this is a standard procedure if
you update your CCS software - you need to do it for each project that you
recompile.
mikedunn
t...@yahoo.com wrote:
Hi all, When I compiled my program on evm642
using ccs 2.0, I suddenly got this error. "line 1: error: Version
4.90.270 is not compatible with this version of BIOS. Please open this
file in the Configuration Tool and update." Actually it is not the
first time I compile that code. I compile that code so many time without
any problem and suddenly got this error. May I know how to make the
version compatible and how to open configuration tool? Seem like I
can't manage to find the "configuration tool" in CCS editor.
Thanks.
tnk
_____________________________________ Note: If you do a simple "reply" with your email client, only the author of
this message will receive your answer. You need to do a "reply all" if you want
your answer to be distributed to the entire group.
_____________________________________ About this discussion group:
<*> To
visit your group on the web, go to: http://groups.yahoo.com/group/c6x/
<*> To unsubscribe from this group, send an email to: c...@yahoogroups.com
<*>
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group: