Hi all,
6711D device has GPIO module, and the device specific
datasheet sprs088M.pdf gives details of only two
registers namely GPDIR and GPEN. And for other details
its asked to see spru584.pdf
This document described all the registers, but no
address details are given for the registers. It says
"See the device-specific datasheet for the memory
address of these registers."
Overall i could not able to get the address of these
registers. Anyone have any idea about this.
Previous peripheral doc spru190d was full descriptive
and gave all the details. now this doc in its latest
version spru190h got cut short and gives only breifing
of peripherals and gives the refferance numbers of the
docs.
Can anyone suggest which doc i can reffer to get these
latest register details. Is it possible to know
atleast whether these registers available or not?. Or
how to make use of GPIO module!
Thanks all,
Bhaskar Reddy N
BHASKAR REDDY . N
Mysore
Mobile: +91 9880 177365
GPIO Register Addresses for 6711D
Started by ●September 22, 2005
Reply by ●September 26, 20052005-09-26
Hi,
the address can also be found in the CSL include (csl_gpio.h) file.
HTH
Gustl
Bhaskar Reddy N wrote:
> Hi all, 6711D device has GPIO module, and the device specific
> datasheet sprs088M.pdf gives details of only two registers namely
> GPDIR and GPEN. And for other details its asked to see spru584.pdf
> This document described all the registers, but no address details are
> given for the registers. It says "See the device-specific datasheet
> for the memory address of these registers." Overall i could not able
> to get the address of these registers. Anyone have any idea about
> this. Previous peripheral doc spru190d was full descriptive and gave
> all the details. now this doc in its latest version spru190h got cut
> short and gives only breifing of peripherals and gives the refferance
> numbers of the docs. Can anyone suggest which doc i can reffer to get
> these latest register details. Is it possible to know atleast whether
> these registers available or not?. Or how to make use of GPIO module! > Thanks all, Bhaskar Reddy N
>
> BHASKAR REDDY . N Mysore Mobile: +91 9880 177365 >
>
> NEW! You can now post a message or access and search the archives of
> this group on DSPRelated.com:
> http://www.dsprelated.com/groups/c6x/1.php
>
> _____________________________________ Note: If you do a simple
> "reply" with your email client, only the author of this message will
> receive your answer. You need to do a "reply all" if you want your
> answer to be distributed to the entire group.
>
> _____________________________________ About this discussion group:
>
> Archives: http://www.dsprelated.com/groups/c6x/1.php
>
> To Post: Send an email to c6x@c6x@...
>
> Other DSP Related Groups: http://www.dsprelated.com/groups.php Yahoo!
> Groups Links
the address can also be found in the CSL include (csl_gpio.h) file.
HTH
Gustl
Bhaskar Reddy N wrote:
> Hi all, 6711D device has GPIO module, and the device specific
> datasheet sprs088M.pdf gives details of only two registers namely
> GPDIR and GPEN. And for other details its asked to see spru584.pdf
> This document described all the registers, but no address details are
> given for the registers. It says "See the device-specific datasheet
> for the memory address of these registers." Overall i could not able
> to get the address of these registers. Anyone have any idea about
> this. Previous peripheral doc spru190d was full descriptive and gave
> all the details. now this doc in its latest version spru190h got cut
> short and gives only breifing of peripherals and gives the refferance
> numbers of the docs. Can anyone suggest which doc i can reffer to get
> these latest register details. Is it possible to know atleast whether
> these registers available or not?. Or how to make use of GPIO module! > Thanks all, Bhaskar Reddy N
>
> BHASKAR REDDY . N Mysore Mobile: +91 9880 177365 >
>
> NEW! You can now post a message or access and search the archives of
> this group on DSPRelated.com:
> http://www.dsprelated.com/groups/c6x/1.php
>
> _____________________________________ Note: If you do a simple
> "reply" with your email client, only the author of this message will
> receive your answer. You need to do a "reply all" if you want your
> answer to be distributed to the entire group.
>
> _____________________________________ About this discussion group:
>
> Archives: http://www.dsprelated.com/groups/c6x/1.php
>
> To Post: Send an email to c6x@c6x@...
>
> Other DSP Related Groups: http://www.dsprelated.com/groups.php Yahoo!
> Groups Links
