Hi,
I'm working with DSK6713 and I want to implement a SW-UART. My Hardware
is a Daughter Card RS232 from DSPGlobal. For building the project I
need 2 libraries "uarthw_c6x1x_mcbsp.l62" and "uartmd.l62"
but they are
not included on the driver CD. Does anybody know how to get the
libraries?
Thanks
Thomas
SW-UART on DSK6713
Started by ●October 21, 2005
Reply by ●October 24, 20052005-10-24
Hi,
I have implemented a SW UART on a 6713 too. I've never read about these
libs and from the name I guess it must be some hardware related stuff. I
would try at DSPGlobal.
HTH Gustl
thomas05281 wrote:
> Hi,
> I'm working with DSK6713 and I want to implement a SW-UART. My Hardware
> is a Daughter Card RS232 from DSPGlobal. For building the project I
> need 2 libraries "uarthw_c6x1x_mcbsp.l62" and "uartmd.l62" but they are
> not included on the driver CD. Does anybody know how to get the
> libraries?
>
> Thanks
> Thomas >
>
I have implemented a SW UART on a 6713 too. I've never read about these
libs and from the name I guess it must be some hardware related stuff. I
would try at DSPGlobal.
HTH Gustl
thomas05281 wrote:
> Hi,
> I'm working with DSK6713 and I want to implement a SW-UART. My Hardware
> is a Daughter Card RS232 from DSPGlobal. For building the project I
> need 2 libraries "uarthw_c6x1x_mcbsp.l62" and "uartmd.l62" but they are
> not included on the driver CD. Does anybody know how to get the
> libraries?
>
> Thanks
> Thomas >
>
Reply by ●October 24, 20052005-10-24
Thomas,
Just to get everyone on the same page [possibly
including me] -
I think that you need sw to support a hw UART [on the
DSPGlobal board]. In that case you should be ignoring
any info relating to 'sw UARTs'.
mikedunn
--- Bernhard 'Gustl' Bauer <gustl@gust...> wrote:
> Hi,
>
> I have implemented a SW UART on a 6713 too. I've
> never read about these
> libs and from the name I guess it must be some
> hardware related stuff. I
> would try at DSPGlobal.
>
> HTH Gustl
>
> thomas05281 wrote:
> > Hi,
> > I'm working with DSK6713 and I want to implement a
> SW-UART. My Hardware
> > is a Daughter Card RS232 from DSPGlobal. For
> building the project I
> > need 2 libraries "uarthw_c6x1x_mcbsp.l62" and
> "uartmd.l62" but they are
> > not included on the driver CD. Does anybody know
> how to get the
> > libraries?
> >
> > Thanks
> > Thomas
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> c6x-unsubscribe@c6x-...
Just to get everyone on the same page [possibly
including me] -
I think that you need sw to support a hw UART [on the
DSPGlobal board]. In that case you should be ignoring
any info relating to 'sw UARTs'.
mikedunn
--- Bernhard 'Gustl' Bauer <gustl@gust...> wrote:
> Hi,
>
> I have implemented a SW UART on a 6713 too. I've
> never read about these
> libs and from the name I guess it must be some
> hardware related stuff. I
> would try at DSPGlobal.
>
> HTH Gustl
>
> thomas05281 wrote:
> > Hi,
> > I'm working with DSK6713 and I want to implement a
> SW-UART. My Hardware
> > is a Daughter Card RS232 from DSPGlobal. For
> building the project I
> > need 2 libraries "uarthw_c6x1x_mcbsp.l62" and
> "uartmd.l62" but they are
> > not included on the driver CD. Does anybody know
> how to get the
> > libraries?
> >
> > Thanks
> > Thomas
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> c6x-unsubscribe@c6x-...
