Would you like to propose me a FM tuner which includes antenna+bandpass filter.
It has to supply 10.7 IF Mhz output with industry-standard 3.5mm stereo jack
connector. I want to connect it to C6713 DSK.
I have searched on the net but there are non-related products on the links.
Regards.
FM tuner, 10.7 Mhz IF output
Started by ●April 14, 2006
Reply by ●April 15, 20062006-04-15
Hi murselonder
If you're using a DSK it's not a production item so just buy a cheap
FM radio, open the case, and probe around with a scope looking for
10.7Mhz.
Most of them use the same common parts so look at the chip numbers and
Google for the data sheets. Then solder connectors on the signal
points you want.
A good tech should be able to get things going in half an hour or less
and you can get by for under $10. After you get it going the chip
data sheets will probably give you a reference design to use for more
units.
Could you tell me exactly what on the DSK you are going to feed
10.7Mhz into?
Regards, Al
--- In c..., murselonder@... wrote:
>
> Would you like to propose me a FM tuner which includes
antenna+bandpass filter. It has to supply 10.7 IF Mhz output with
industry-standard 3.5mm stereo jack connector. I want to connect it to
C6713 DSK.
>
> I have searched on the net but there are non-related products on the
links.
>
> Regards.
>
If you're using a DSK it's not a production item so just buy a cheap
FM radio, open the case, and probe around with a scope looking for
10.7Mhz.
Most of them use the same common parts so look at the chip numbers and
Google for the data sheets. Then solder connectors on the signal
points you want.
A good tech should be able to get things going in half an hour or less
and you can get by for under $10. After you get it going the chip
data sheets will probably give you a reference design to use for more
units.
Could you tell me exactly what on the DSK you are going to feed
10.7Mhz into?
Regards, Al
--- In c..., murselonder@... wrote:
>
> Would you like to propose me a FM tuner which includes
antenna+bandpass filter. It has to supply 10.7 IF Mhz output with
industry-standard 3.5mm stereo jack connector. I want to connect it to
C6713 DSK.
>
> I have searched on the net but there are non-related products on the
links.
>
> Regards.
>
