XDS510 USB Driver Problem on DM642EVM Board

Hi guys,

Presently i am having DM642EVM Board with me.
I am having CCS2.2 and also i followed the steps they were present in the "dm642evm_QuickStartGuide".

After installing the patches and "SdConfig C6000 v2.2x" i am not getting the emulator to run.
After all installation i started with "Setup CCS 2", then i imported EVMDM642XDS510USB Emulator.

Then while starting the CCS2.2 it is showing the error that

" Can't Initialize Target CPU
I/O Port = 510
Board Name: DM642 EVM via XDS510-USB
Cpu Name:DSP_C64xx
..
.//...
.//.

"

i did as per the installation guide.
i tried so many times.
Any Sujjestion pls...

Regards,
Hari Start a New Thread

hi, hari
Can you tell which 510 USB emulator are you using? (BlackHawk, Ateme etc)
What are the error message are you geting.

swapnali

hari wrote:
Hi guys,

Presently i am having DM642EVM Board with me.
I am having CCS2.2 and also i followed the steps they were present in the "dm642evm_QuickStartGuide".

After installing the patches and "SdConfig C6000 v2.2x" i am not getting the emulator to run.

After all installation i started with "Setup CCS 2", then i imported EVMDM642XDS510USB Emulator.

Then while starting the CCS2.2 it is showing the error that

" Can't Initialize Target CPU
I/O Port = 510
Board Name: DM642 EVM via XDS510-USB
Cpu Name:DSP_C64xx
..
.//...
.//.

"

i did as per the installation guide.
i tried so many times.

Any Sujjestion pls...

Regards,
Hari

---------------------------------
Heres a new way to find what you're looking for - Yahoo! Answers Start a New Thread

Hi Guys,
Myproblem was sloved. Finally the device driver for XDS510USB is wrong. Now i have installed the right one. Now i can run the Emualtor.
Thanks all
----- Original Message -----
From: amitay uoozan
To: hari
Sent: Monday, August 14, 2006 6:35 PM
Subject: Re: [c6x] XDS510 USB Driver Problem on DM642EVM Board
hi harry

did you try to replace the usb cable itself?
the usb cable i got with the dsp dev kit cause to me some problems till i replace it

hari wrote:
Hi guys,

Presently i am having DM642EVM Board with me.
I am having CCS2.2 and also i followed the steps they were present in the "dm642evm_QuickStartGuide".

After installing the patches and "SdConfig C6000 v2.2x" i am not getting the emulator to run.
After all installation i started with "Setup CCS 2", then i imported EVMDM642XDS510USB Emulator.

Then while starting the CCS2.2 it is showing the error that

" Can't Initialize Target CPU
I/O Port = 510
Board Name: DM642 EVM via XDS510-USB
Cpu Name:DSP_C64xx
..
.//...
.//.

"

i did as per the installation guide.
i tried so many times.
Any Sujjestion pls...

Regards,
Hari

------
Get your email and more, right on the new Yahoo.com Start a New Thread

Hari-
> Myproblem was sloved. Finally the device driver for XDS510USB is wrong. Now i
> have installed the right one. Now i can run the Emualtor.

Thanks for letting us know!

-Jeff
> ----- Original Message -----
> From:amitay uoozan
> To: hari
> Sent: Monday, August 14, 2006 6:35 PM
> Subject: Re: [c6x] XDS510 USB Driver Problem on DM642EVM Board
> hi harry did you try to replace the usb cable itself?the usb cable i got
> with the dsp dev kit cause to me some problems till i replace it
>
> hari wrote:
>
> Hi guys, Presently i am having DM642EVM Board with me.I am
> having CCS2.2 and also i followed the steps they were present
> in the "dm642evm_QuickStartGuide". After installing the
> patches and "SdConfig C6000 v2.2x" i am not getting the
> emulator to run. After all installation i started with "Setup
> CCS 2", then i imported EVMDM642XDS510USB Emulator. Then while
> starting the CCS2.2 it is showing the error that " Can't
> Initialize Target CPU I/O Port = 510 Board Name: DM642 EVM
> via XDS510-USBCpu Name:DSP_C64xx...//....//. " i did as per
> the installation guide.i tried so many times. Any Sujjestion
> pls... Regards,Hari
> Start a New Thread