hi
i had tried to run sine wave generation program given in the book of rulph
chassaing page 9, example 1.1
when i built this program there is no error but while i run it no sound output
comes...
when i run the out file given in CD of this book sound comes.. what is the
problem..
plz help me...
not geting sound at codec output...
Started by ●March 7, 2007
Reply by ●March 8, 20072007-03-08
atul,
It would help greatly (for me) to have location reference (maybe a ISBN
number) for the referenced book
Then, for ANY help, we need to see your source code, so post it.
and include the linker command file and a few details about your build options
R. Williams
---------- Original Message -----------
From: a...@gmail.com
To: c...
Sent: Wed, 07 Mar 2007 13:40:31 -0500
Subject: [c6x] not geting sound at codec output...
> hi
> i had tried to run sine wave generation program given in the book
> of rulph chassaing page 9, example 1.1
>
> when i built this program there is no error but while i run it no
> sound output comes... when i run the out file given in CD of this
> book sound comes.. what is the problem.. plz help me...
------- End of Original Message -------
It would help greatly (for me) to have location reference (maybe a ISBN
number) for the referenced book
Then, for ANY help, we need to see your source code, so post it.
and include the linker command file and a few details about your build options
R. Williams
---------- Original Message -----------
From: a...@gmail.com
To: c...
Sent: Wed, 07 Mar 2007 13:40:31 -0500
Subject: [c6x] not geting sound at codec output...
> hi
> i had tried to run sine wave generation program given in the book
> of rulph chassaing page 9, example 1.1
>
> when i built this program there is no error but while i run it no
> sound output comes... when i run the out file given in CD of this
> book sound comes.. what is the problem.. plz help me...
------- End of Original Message -------
Reply by ●March 8, 20072007-03-08
hello richard,
ISBN of book is 0471690074. this is the book titled by "digital signal
processing and applications with the C6713 and C6416 DSK"ho
i am attaching the whole program, i have taken this program from CD of same
book. I gone trough same steps as written in book(page no. 9). i have added
all files as we need for this program and also changed the compiler option
as directed in the book(page 12- compiler option).
richrd i am very thankful to you as you are considering my problem.
thank you.
go to attachment.
On 3/8/07, Richard Williams wrote:
> atul,
>
> It would help greatly (for me) to have location reference (maybe a ISBN
> number) for the referenced book
>
> Then, for ANY help, we need to see your source code, so post it.
> and include the linker command file and a few details about your build
> options
>
> R. Williams
---------- Original Message -----------
> From: a...@gmail.com
> To: c...
> Sent: Wed, 07 Mar 2007 13:40:31 -0500
> Subject: [c6x] not geting sound at codec output...
>
> > hi
> > i had tried to run sine wave generation program given in the book
> > of rulph chassaing page 9, example 1.1
> >
> > when i built this program there is no error but while i run it no
> > sound output comes... when i run the out file given in CD of this
> > book sound comes.. what is the problem.. plz help me...
> ------- End of Original Message -------
ISBN of book is 0471690074. this is the book titled by "digital signal
processing and applications with the C6713 and C6416 DSK"ho
i am attaching the whole program, i have taken this program from CD of same
book. I gone trough same steps as written in book(page no. 9). i have added
all files as we need for this program and also changed the compiler option
as directed in the book(page 12- compiler option).
richrd i am very thankful to you as you are considering my problem.
thank you.
go to attachment.
On 3/8/07, Richard Williams wrote:
> atul,
>
> It would help greatly (for me) to have location reference (maybe a ISBN
> number) for the referenced book
>
> Then, for ANY help, we need to see your source code, so post it.
> and include the linker command file and a few details about your build
> options
>
> R. Williams
---------- Original Message -----------
> From: a...@gmail.com
> To: c...
> Sent: Wed, 07 Mar 2007 13:40:31 -0500
> Subject: [c6x] not geting sound at codec output...
>
> > hi
> > i had tried to run sine wave generation program given in the book
> > of rulph chassaing page 9, example 1.1
> >
> > when i built this program there is no error but while i run it no
> > sound output comes... when i run the out file given in CD of this
> > book sound comes.. what is the problem.. plz help me...
> ------- End of Original Message -------
Reply by ●March 9, 20072007-03-09
May be you can give us the code program of the book so we can see whats wrong
with that program
gepeng
----- Original Message ----
From: "a...@gmail.com"
To: c...
Sent: Thursday, March 8, 2007 7:45:43 AM
Subject: [c6x] not geting sound at codec output...
hi
i had tried to run sine wave generation program given in the book of rulph chassaing page 9, example 1.1
when i built this program there is no error but while i run it no sound output comes...
when i run the out file given in CD of this book sound comes.. what is the problem..
plz help me...
gepeng
----- Original Message ----
From: "a...@gmail.com"
To: c...
Sent: Thursday, March 8, 2007 7:45:43 AM
Subject: [c6x] not geting sound at codec output...
hi
i had tried to run sine wave generation program given in the book of rulph chassaing page 9, example 1.1
when i built this program there is no error but while i run it no sound output comes...
when i run the out file given in CD of this book sound comes.. what is the problem..
plz help me...
Reply by ●March 9, 20072007-03-09
Atul,
naturally, the virus blockers deleted all the attachments.
If you send the *.cmd file as *.txt
and the source files, not zipped, as *.c and *.h files,
don't bother to send the librarys, .obj, .out, etc
R. Williams
---------- Original Message -----------
From: "Atul Maurya"
To: "Richard Williams" , c...
Sent: Thu, 8 Mar 2007 15:05:08 +0800
Subject: [Bad Attachment] Re: [c6x] not geting sound at codec output...
> Warning: This message has had one or more attachments removed
> Warning: (sine8_LED.rar, C6713dsk.cmd).
> Warning: Please read the "/opt/Fortress/engine/etc/reports/FSL-
> Attachment-Warning.txt" attachment(s) for more information.
>
> hello richard,
> ISBN of book is 0471690074. this is the book titled by "digital
> signal processing and applications with the C6713 and C6416 DSK"ho
>
> i am attaching the whole program, i have taken this program from CD
> of same book. I gone trough same steps as written in book(page no. 9)
> . i have added all files as we need for this program and also
> changed the compiler option as directed in the book(page 12-
> compiler option).
>
> richrd i am very thankful to you as you are considering my problem.
>
> thank you.
>
> go to attachment.
>
> On 3/8/07, Richard Williams wrote:
> >
> >
> > atul,
> >
> > It would help greatly (for me) to have location reference (maybe a ISBN
> > number) for the referenced book
> >
> > Then, for ANY help, we need to see your source code, so post it.
> > and include the linker command file and a few details about your build
> > options
> >
> > R. Williams
>
> ---------- Original Message -----------
> > From: a...@gmail.com
> > To: c...
> > Sent: Wed, 07 Mar 2007 13:40:31 -0500
> > Subject: [c6x] not geting sound at codec output...
> >
> > > hi
> > > i had tried to run sine wave generation program given in the book
> > > of rulph chassaing page 9, example 1.1
> > >
> > > when i built this program there is no error but while i run it no
> > > sound output comes... when i run the out file given in CD of this
> > > book sound comes.. what is the problem.. plz help me...
> > ------- End of Original Message -------
> >
> >
------- End of Original Message -------
naturally, the virus blockers deleted all the attachments.
If you send the *.cmd file as *.txt
and the source files, not zipped, as *.c and *.h files,
don't bother to send the librarys, .obj, .out, etc
R. Williams
---------- Original Message -----------
From: "Atul Maurya"
To: "Richard Williams" , c...
Sent: Thu, 8 Mar 2007 15:05:08 +0800
Subject: [Bad Attachment] Re: [c6x] not geting sound at codec output...
> Warning: This message has had one or more attachments removed
> Warning: (sine8_LED.rar, C6713dsk.cmd).
> Warning: Please read the "/opt/Fortress/engine/etc/reports/FSL-
> Attachment-Warning.txt" attachment(s) for more information.
>
> hello richard,
> ISBN of book is 0471690074. this is the book titled by "digital
> signal processing and applications with the C6713 and C6416 DSK"ho
>
> i am attaching the whole program, i have taken this program from CD
> of same book. I gone trough same steps as written in book(page no. 9)
> . i have added all files as we need for this program and also
> changed the compiler option as directed in the book(page 12-
> compiler option).
>
> richrd i am very thankful to you as you are considering my problem.
>
> thank you.
>
> go to attachment.
>
> On 3/8/07, Richard Williams wrote:
> >
> >
> > atul,
> >
> > It would help greatly (for me) to have location reference (maybe a ISBN
> > number) for the referenced book
> >
> > Then, for ANY help, we need to see your source code, so post it.
> > and include the linker command file and a few details about your build
> > options
> >
> > R. Williams
>
> ---------- Original Message -----------
> > From: a...@gmail.com
> > To: c...
> > Sent: Wed, 07 Mar 2007 13:40:31 -0500
> > Subject: [c6x] not geting sound at codec output...
> >
> > > hi
> > > i had tried to run sine wave generation program given in the book
> > > of rulph chassaing page 9, example 1.1
> > >
> > > when i built this program there is no error but while i run it no
> > > sound output comes... when i run the out file given in CD of this
> > > book sound comes.. what is the problem.. plz help me...
> > ------- End of Original Message -------
> >
> >
------- End of Original Message -------