|
hello I work on C6201 When I compile project, it is OK ,0 error I makes the debug " run " OK , and I receives somes infos from simulator analysis (event) But if I change the register PCC to change the configuration of the memory by putting pcc=2 to know the number of cache default. During the debug the tool shows " me Can t Run Target CPU: Error number-2600 Error address 3" Thanks jalel |
|
|
error
Started by ●January 20, 2004
Reply by ●January 22, 20042004-01-22
|
Hello jalel u might be facing the problem due to not inserting the probe point correctly u should always activate probe point only after building the program and then run it gordhan jalel ktari <> wrote: hello I work on C6201 When I compile project, it is OK ,0 error I makes the debug " run " OK , and I receives somes infos from simulator analysis (event) But if I change the register PCC to change the configuration of the memory by putting pcc=2 to know the number of cache default. During the debug the tool shows " me Can t Run Target CPU: Error number-2600 Error address 3" Thanks jalel _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: To Post: To Leave: Archives: http://www.yahoogroups.com/group/code-comp More Groups: http://www.dsprelated.com --------------------------------- Yahoo! Groups Links To hello Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.Download now. |
