It has 6 legs, corn yellow, approximately 0.8mm X 0.5mm X 0.3mm, the two rows of text are "MCL 0 322" "ADT 1-1W" "." Third row has a dot. I found two of this device on my 105MS ADC board, while on another piece of board, somebody took off this chip. This makes me wonder what the purpose of this chip is. Hope you could help. Frank
What is this device? "MCL 0 322", followed by "ADT 1-1W"?
Started by ●November 24, 2005
Reply by ●November 24, 20052005-11-24
Frank, Frank wrote:> It has 6 legs, corn yellow, approximately 0.8mm X 0.5mm X 0.3mm, > the two rows of text are > "MCL 0 322" > "ADT 1-1W"It's a 1:1 transformer from Mini-Circuits. Look at: http://www.minicircuits.com/dg03-236.pdf It's the very first entry on that page. Jeroen Belleman
Reply by ●November 27, 20052005-11-27
"Jeroen Belleman" <jeroen@nospam.please> wrote in message news:dm4c2t$7tg$1@sunnews.cern.ch...> Frank, Frank wrote: > > It has 6 legs, corn yellow, approximately 0.8mm X 0.5mm X 0.3mm, > > the two rows of text are > > "MCL 0 322" > > "ADT 1-1W" > > It's a 1:1 transformer from Mini-Circuits. Look at: > http://www.minicircuits.com/dg03-236.pdf > It's the very first entry on that page. > > Jeroen BellemanThank you Jeroen. I think it is the correct device.