Does any body know how to get a Hilbert transformer in
simulink?
I need it to create a Single Sideband modulator in
simulink.
Thanks.
Cheers,
Naveen
Reply by Egler, Mark●February 1, 20052005-02-01
Naveen,
If you
have the DSP Blockset, you can use the
Analytic Signal block and take the
imaginary part of the complex output. Or you
can use the Remez FIR Filter Design
block with the Hilbert Transformer filter
type.
Mark
-----Original Message----- From: Naveen
Somasunderam
[mailto:s...@yahoo.com] Sent: Sunday, January 30,
2005
4:23 PM To: m...@yahoogroups.com Subject:
[matlab]
Hilbert Transformer in Simulink
Hi,
Does
any body know how to get a Hilbert transformer in simulink?
I need
it to create a Single Sideband modulator
in simulink.
Thanks.
Cheers, Naveen
NEW! You
can now post a message or access and
search the archives of this group on
DSPRelated.com: http://www.dsprelated.com/groups/matlab/1.php
_____________________________________ Note:
If you do a simple "reply"
with your email client, only the author of this
message will receive your
answer. You need to do a "reply all" if you
want your answer to be
distributed to the entire
group.
_____________________________________ About this discussion
group:
****************************************************************
The information transmitted in this message is confidential and may be
privileged. Any review, retransmission, dissemination, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you are not the intended recipient, please notify Analogic
Corporation immediately - by replying to this message or by sending an email to
D...@analogic.com - and destroy all copies of this information, including any
attachments, without reading or disclosing them.