Hello, Seems as though this board is missing the PCB-mount DB9 serial port as well as what appears to be some RS-232 logic level shifting IC(s) and analog parts. Also, the Timer/PWM, ADC and GPIO/SERIAL set of connectors do not have pins. I'm specifically interested in getting the RS-232 functionality going, but I need to know what parts need to be soldered. Can anyone help me out on this one? Thanks -- please email |
|
Missing ports/pins on Demo Brd (56F8300DEMO)
Started by ●November 10, 2003
Reply by ●November 11, 20032003-11-11
To make the RS232 work on the 8300DSK, you need to add the level-translating
IC and 5 capacitors as noted in the DSK schematic on page 24 of the PDF (http://e- www.motorola.com/files/dsp/doc/user_guide/MC56F8300DBUM.pdf). The schematic references a Sipex SP3232, but the Maxim MAX3232 appears to be a pin for pin replacement. I've not done the modification on this board, but I have successfully done it on the DSP56F800DEMO board (with the Maxim part) which has the same RS232 block as this board. --david --- In , "Nicholas Singh" <nicsingh@y...> wrote: > Hello, > > Seems as though this board is missing the PCB-mount DB9 serial port > as well as what appears to be some RS-232 logic level shifting IC(s) > and analog parts. Also, the Timer/PWM, ADC and GPIO/SERIAL set of > connectors do not have pins. > > I'm specifically interested in getting the RS-232 functionality > going, but I need to know what parts need to be soldered. Can anyone > help me out on this one? > > Thanks -- please email nf_singh@i... |