Forums

AW: 563xx Flash Boot / Image creation

Started by Bende Georg February 17, 2004
You can set up Codewarrior to generate S-Record file for you; then you can
upload this file with the flash_over_jtag utility. This file includes all code
that was generated.

Georg Bende
Softwareentwickler
Abteilung Elektronik
Dr. Fritz Faulhaber GmbH & Co KG
Daimlerstr. 23
71101 Schaich
Tel: +49 7031 638294 > -----Ursprgliche Nachricht-----
> Von: xelarep [mailto:]
> Gesendet: Dienstag, 17. Februar 2004 14:29
> An:
> Betreff: [motoroladsp] 563xx Flash Boot / Image creation > I want to create a flash/eeprom image for the 563xx series. As far as
> I can see the internal bootloader only sets up the internal p-RAM. So
> I have to copy the contents of x and y-RAM in the init phase of my
> application. I can generate p-,x-,y- only files with srec.exe. Then I
> have to "link" these with an external program to create a complete
> image with additional information for start addresses, lengths etc.
> for the bootloader / init phase for my application.
>
> Is this correct so far? Is there a more simple way?
>
> I programmed my flash with the debugger so far, but this is no real
> production solution and I want to save the additional programm code
> save for copying for my application...
>
> Regards
>
> Alexander >
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
> Printer at MyInks.com. Free s/h on orders $50 or more to the
> US & Canada.
> http://www.c1tracking.com/l.asp?cidU11
> http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/PNArlB/TM
> --------------------------
> -------~->
>
> _____________________________________
> Note: If you do a simple "reply" with your email client, only
> the author of this message will receive your answer. You
> need to do a "reply all" if you want your answer to be
> distributed to the entire group.
>
> _____________________________________
> About this discussion group:
>
> To Join:
>
> To Post:
>
> To Leave:
>
> Archives: http://www.yahoogroups.com/group/motoroladsp
>
> More Groups: http://www.dsprelated.com/groups.php3
>
> Yahoo! Groups Links >




> You can set up Codewarrior to generate S-Record file for you; then
you can upload this file with the flash_over_jtag utility. This file
includes all code that was generated.

Hm, I'm using the Suite56 :-( It's the 56364...



Bende Georg wrote:
> You can set up Codewarrior to generate S-Record file for you; then you can
upload this file with the flash_over_jtag utility. This file includes all code
that was generated.

Is there a Codewarrior for 563XX?

Anyway, I recently faced the same problem, and I did the bootloader
that inits P:X:Y: mem, plus a tool to convert .lod files to a binary
representation for the bootloader, output as 56k assembly source to
be included in seperate flash programming code to be dumped via
debug port. Let me know if any of these could be useful for you and
I'll email them to you.

Ciao,
Stefan