Forums

Symphony Studio 56720 Simulator -- simulate input and output signals?

Started by "joh...@ymail.com" February 3, 2009
Hi,

I've started to use Symphony Studio 56720 Simulator and can simulate
simple C programs, like the C-Tutorial in the user guide.

How do you simulate input and output signals? Any insights,
documentation or code examples would be very much appreciated.

Thank you for your help.

Cheers,

John.
Hi John,

please refer to the Freescale application notes APR30

http://www.freescale.com/files/dsp/doc/app_note/APR30.pdf?fpsp=1&WT_TYPE=Application%20Notes&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation

Section 4 gives a general overview on the simulator.

and APR35 firstly:

http://www.freescale.com/files/dsp/doc/app_note/APR35.pdf?fpsp=1&WT_TYPE=Application%20Notes&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation

Section 2 describes how to read files into the simulated buffers.

Please take a look to the Symphony Studio User's Guide, see:

http://www.freescale.com/files/dsp/doc/user_guide/DSPSTUDIOUG.pdf?fpsp=1&WT_TYPE=Users%20Guides&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation

Appendix A.1 describes how to assign I/O files.

Once you've got the DSP5672x simulator in the debug tab, right click on it, select 'edit DSP56720 simulator' and add the commands.

I used the GUI56300 sumulator up to now, but it should work similarly using the Symphony Sudio tool chain.

Regards

Christian

> Hi,
>
> I've started to use Symphony Studio 56720 Simulator and can simulate
> simple C programs, like the C-Tutorial in the user guide.
>
> How do you simulate input and output signals? Any insights,
> documentation or code examples would be very much appreciated.
>
> Thank you for your help.
>
> Cheers,
>
> John.
>
John,

There is some support for I/O simulation that should be documented in the Symphony Studio manual. But I believe the old Suite56 tools support I/O simulation better.

--
Mark

________________________________
From: "j...@ymail.com"
To: m...
Sent: Tuesday, February 3, 2009 4:36:27 AM
Subject: [motoroladsp] Symphony Studio 56720 Simulator -- simulate input and output signals?
Hi,

I've started to use Symphony Studio 56720 Simulator and can simulate
simple C programs, like the C-Tutorial in the user guide.

How do you simulate input and output signals? Any insights,
documentation or code examples would be very much appreciated.

Thank you for your help.

Cheers,

John.