Forums

about DSP56F807

Started by swaroop September 19, 2002
hi
Can any one give the description of DAC pins on the DSP56807EVM
board...........
Iam writing on channels A and D using the SDKs DAC driver...which
pins I must use to see the output.
thanks in advance....
swaroop



The D/A connector is J26, connections are as follows:
D/A0 = J26-1
D/A1 = J26-3
D/A2 = J26-5
D/A3 = J26-7
J26 pins 2, 4, 6, and 8 are connected to ground.

Regards,

Art Johnson
Senior Systems Analyst
PMC Prime Mover Controls Inc.
3600 Gilmore Way
Burnaby, B.C., Canada
V5G 4R8
Phone: 604 433-4644
FAX: 604 433-5570
Email:
http://www.pmc-controls.com
-----Original Message-----
From: swaroop [mailto:]
Sent: Thursday, September 19, 2002 2:30 AM
To:
Subject: [motoroladsp] about DSP56F807 hi
Can any one give the description of DAC pins on the DSP56807EVM
board...........
Iam writing on channels A and D using the SDKs DAC driver...which
pins I must use to see the output.
thanks in advance....
swaroop

_____________________________________
Note: If you do a simple "reply" with your email client, only the author of this
message will receive your answer. You need to do a "reply all" if you want your
answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join:

To Post:

To Leave:

Archives: http://www.yahoogroups.com/group/motoroladsp

More Groups: http://www.dsprelated.com/groups.php3 ">http://docs.yahoo.com/info/terms/