Doubt reg MIPS Vs MHz

Started by Anonymous in comp.dsp12 years ago 13 replies

Hi If a processor operating at 200MHz. Whats the Max. MIPS the processor supports. Is there a way to calculate MIPS from MHz ?? How do u...

Hi If a processor operating at 200MHz. Whats the Max. MIPS the processor supports. Is there a way to calculate MIPS from MHz ?? How do u relate MIPS and MHz ?? Regards Shangai Sun


Issue with MIPS measurments in TMS320c6416

Started by Hamid in comp.dsp13 years ago 6 replies

Hi all I have an optimized code running on DSK6416, as I count the number of instruction in my code , it is 74 and because the sampling rate...

Hi all I have an optimized code running on DSK6416, as I count the number of instruction in my code , it is 74 and because the sampling rate is 8000Hz so it comes to .592 MIPS) I used the profiler and also TIMERs of DSP to measure the MIPS and it gives me almost a double(1.1 MIPS) number. I have checked my code to make sure, no part of it cause latency . I'm puzzled about the differ...


Regarding MIPS caluculation on TMS320C5510

Started by Viswanath in comp.dsp11 years ago 3 replies

Hi all, I am doing my project on TMS320C5510.Upto now i am using profiling method to caluculate MIPS but sometimes it is not giving the...

Hi all, I am doing my project on TMS320C5510.Upto now i am using profiling method to caluculate MIPS but sometimes it is not giving the correct reults and the results are differring.Is there any other alternative to caluculate MIPS. pls help me on this.. Thanks & Best regards, Viswanath..


calculating MIPS in a application

Started by mia in comp.dsp14 years ago 4 replies

hi all, i want to know as to how a product engg calcuates MIPS in a application.well we have a algorithm(image compression) which we...

hi all, i want to know as to how a product engg calcuates MIPS in a application.well we have a algorithm(image compression) which we plan to implement it in a dsp processor.in the process of choosing the processor,the main criteria which is been asked is ...whats the MIPS of ur application???? how can one calculate that..??? thanks miadsp


sparse least squares on MIPS platform

Started by syuval in comp.dsp8 years ago

I'm interested in solving a sparse least-squares estimation problem on an embedded, MIPS processor. Is there any existing sparse linear...

I'm interested in solving a sparse least-squares estimation problem on an embedded, MIPS processor. Is there any existing sparse linear algebra package for this platform? While MIPS does have floating-point capabilities, they are very limited, and I'd prefer a fixed point solution.


F2812 MIPS for C code appears low

Started by perf...@yahoo.com in comp.dsp12 years ago 3 replies

ok (Tim? :-), now I've got the PLL set to 150Mhz, all code and data located in internal RAM, I can verify actual 150 MIPS speed using RPT NOP...

ok (Tim? :-), now I've got the PLL set to 150Mhz, all code and data located in internal RAM, I can verify actual 150 MIPS speed using RPT NOP instructions, but now when I time an actual C function such as the PID example TI supplies, it appears to be ~1/6 the speed of 150 MIPS. e.g. timing the following C function, I get about 5 us per call. Single stepping in assembler mode, I count about ...


question about unit to calculate program speed

Started by thinhdlbk in comp.dsp12 years ago 1 reply

Hello all, any one can share me what is related between MIPS and MHz if I have a number in MHz how can I change it to MIPS Thanks. This...

Hello all, any one can share me what is related between MIPS and MHz if I have a number in MHz how can I change it to MIPS Thanks. This message was sent using the Comp.DSP web interface on www.DSPRelated.com


mips estimation on pc

Started by rich_158 in comp.dsp9 years ago 3 replies

hi i would like to qualify the speed of an algorithm on a desktop PC. I know that a mips calculation is not really accurate but i just require...

hi i would like to qualify the speed of an algorithm on a desktop PC. I know that a mips calculation is not really accurate but i just require something that will give a basic indication of speed so i can estimate and work on reducing the algorithm complexity in quite a formal. thanks


The ADSP-2181 EZ-Kit Lite

Started by Jack L. in comp.dsp13 years ago 5 replies

Our school is selling these EZ-Kit Lites out for almost nothing. I'm wondering if it's possible to put two or more together so they become...

Our school is selling these EZ-Kit Lites out for almost nothing. I'm wondering if it's possible to put two or more together so they become a parallel distributed computing system, as in, since they've 20 MIPS, can they become 20 MIPS x [number of 2181 together]? :) -- Mvh / Best regards, Jack, Copenhagen The email address is for real. :)


How to choose the right MIPS for my filters design

Started by domistep in comp.dsp13 years ago 3 replies

HEllo, I have an acquisition system of 30 measurements. The sampling rate for one acquisition is 1000 Hz. Each acquisition must be filtered...

HEllo, I have an acquisition system of 30 measurements. The sampling rate for one acquisition is 1000 Hz. Each acquisition must be filtered with a FIR with 16 Taps and 16 sample of the signal acquistion will be used. I will use a TSM320C2xxx with a frequency of 150 Mhz. How many MIPs do i need to achieve thoses filtering operations. Thank oyu


MIPS required for G.165,G.729AB

Started by praveen in comp.dsp13 years ago 6 replies

Hello, I wanted to know the MIPS required for G.165,G729AB,T.38 and V.150. I am Choosing a DSP (Analog ot TI DSP) for a application which has...

Hello, I wanted to know the MIPS required for G.165,G729AB,T.38 and V.150. I am Choosing a DSP (Analog ot TI DSP) for a application which has the above tasks. Thanks and regards Praveen


MIPS analysis of an application on DSP processor.

Started by Anonymous in comp.dsp12 years ago 1 reply

Hi all, can anyone give me a pointer for the following: How to assess MIPS requirement for video encoder on a particular DSP processor....

Hi all, can anyone give me a pointer for the following: How to assess MIPS requirement for video encoder on a particular DSP processor. This is to see the feasibility of implementation. Let's say processor freq. is f, frame rate of encoder is 25 fps. size is 720x576. Thanks n regards, -vijay


AMR- WB & AMR- NB

Started by rajanikanth in comp.dsp12 years ago 1 reply

Hi to all, I am doing projects of AMR- WB(ITU G.722.2) & AMR- NB implementation on ARM9E. I have the following doubts, please...

Hi to all, I am doing projects of AMR- WB(ITU G.722.2) & AMR- NB implementation on ARM9E. I have the following doubts, please clarify. 1) What are the standards for AMR- NB? Is 3gpp AMR-NB same as ITU G.723.1 ? 2) AMR- WB and GSM-AMR are same or not ? 2) What is the difference between ARM and TI- processors in the MIPS point of view ? 3) How many MIPS the AMR- WB will...


Happy 2008!

Started by Randy Yates in comp.dsp10 years ago 4 replies

To All comp.dsp'ers the World Over: Happy New Year!!! - May all of your filter designs converge - May your available MIPS always...

To All comp.dsp'ers the World Over: Happy New Year!!! - May all of your filter designs converge - May your available MIPS always exceed your required MIPS - May your IIRs never limit-cycle - May your documentation always provide just the right answers - May all your hardware designs be low-power, low-cost, small, and noise-free - May you always find clients and work! ...


DFT Computation time at 16 MIPS

Started by Vince in comp.dsp7 years ago 9 replies

I'm processing a 1-D DFT at 16 MIPS and I'm trying to find out my computation time. How do I do this? Any help would be great.

I'm processing a 1-D DFT at 16 MIPS and I'm trying to find out my computation time. How do I do this? Any help would be great.


TI F2812 DSP actual MIPS < 150 ?

Started by perf...@yahoo.com in comp.dsp12 years ago 6 replies

running a while() loop on the SpectrumDigital F2812 EZDSP evaluation board, using a 30 Mhz clock crystal, toggling the external XF bit after...

running a while() loop on the SpectrumDigital F2812 EZDSP evaluation board, using a 30 Mhz clock crystal, toggling the external XF bit after 10,000 while() loops, and monitoring timing on a scope, it appears that the 6 assembler instructions that comprise the while() loop are executed at a rate ~2.3MIPS. This seems a little low given the advertised 150 MIPS spec of the F2812. Am I thin...


searching for a low power DSP, about 80 MIPS with flash and A/D's

Started by Fonze in comp.dsp14 years ago 10 replies

Hello everyone, So I'm lookig for a DSP with the following characteristics : - about 80-100 MIPS - 16 bits fixed point operations -...

Hello everyone, So I'm lookig for a DSP with the following characteristics : - about 80-100 MIPS - 16 bits fixed point operations - low-power for embedded application - on-chip flash (or EEPROM) - at least 8 12-bits A/D's As you see, my application doesn't require too much calculation power. But the problem is I just can't find what I need. All DSPs I find with all the peripherals are...


C64 TI, Difference between running a code from external or L2 memory

Started by HasPer in comp.dsp10 years ago 2 replies

Hi guys, I have a DSP code running on C64x and it is about 30 MIPS (the code resides in L2), if I use L2 for some other purposes and the DSP...

Hi guys, I have a DSP code running on C64x and it is about 30 MIPS (the code resides in L2), if I use L2 for some other purposes and the DSP code resides in external memory (basically the Program should be transferred from External memory to cache whenever is needed), what is the effect of this change on the MIPS, is it going to be substantial or not. I appreciate any help or comments. ...


AMR WB+ (fixed point) Frame duration

Started by ranjeeta_sharma8 in comp.dsp11 years ago 1 reply

Hi all, I am trying to port AMR WB+ (fixed point Base line) to some platform. I want to calculte MIPS consumption of the codec. I know, if it...

Hi all, I am trying to port AMR WB+ (fixed point Base line) to some platform. I want to calculte MIPS consumption of the codec. I know, if it takes 'X' million instructions per frame on the processor and 'T' is the frame duration, then MIPS = X/T I have the value of X with me. Can any body tell me the frame duration of AMR WB+ Codec (whether it is 20ms or something else). Thanks...


recherche DSP

Started by Fonze in comp.dsp14 years ago 2 replies

Bonjour ? tous, Voil?, je recherche un DSP qui aurait les caract?ristiques suivantes : 60 MIPS min, 16 bits virgule fixe avec si possible...

Bonjour ? tous, Voil?, je recherche un DSP qui aurait les caract?ristiques suivantes : 60 MIPS min, 16 bits virgule fixe avec si possible flash ou EEPROM interne. Comme vous le voyez, ?a n'est pas hors du commun, 60 MIPS c'est m?me peu. Par contre, il serait utile d'avoir des entr?es sorties analogiques, du style : AD et DA 12 bits min. Les DSP ayant des AD sont trouvables, mais o? che...