Hello, I would like to know the status of signal EBG on 218x processor when the ICE-PORT is not used. In my application, after power on reset to DSP i use ICE-PORT for booting the code( I enable the ICE port by asserting HIGH on EE signal).The signal EBG drives an interrupt of other processor.When the booting is over I deassert the EE signal(i.e. ICE pORT is disabled).At this point will the EBG tristated?? I would like to know this because after the booting the same interrupt(of other processor) is driven by some other flag of DSP. Kind Regards, Jasdeep. |
Status of ICE-PORT signal (EBG)
Started by ●September 23, 2002