|
Hi ! I have PCM3003 daughter card. When I was trying to get 32bit rate , I lost my samples, I set jumper 11 and 12 pin 3-4 , default settings is jumper 11 pin 5-6 and jumper 12 3-4 . Acturally my program works well for the 16 bit case , what is the problem , thanks . ****************************************** ----- Address: Aizezi. Abuding Volrat thamsgatan 20-3331 Goteborg 41260 Sweden Phone: 46 73 6741871 ----- ****************************************** |
|
|
jumper setting
Started by ●June 28, 2003
Reply by ●June 29, 20032003-06-29
|
> I have PCM3003 daughter card. When I was trying > to get 32bit rate , I > lost my samples, I set jumper 11 and 12 pin 3-4 , > default settings is > jumper 11 pin 5-6 and jumper 12 3-4 . ok - you switched the jumpers - but did you actually change the setting of McBSP for reading 32-bit long samples? > Acturally my program works well for the 16 bit > case , what is the > problem , thanks . are you asking us what the problem is? ;-) we don't know - if your program works with 16 bits and that's all you need - then there is no problem to me ;-) __________________________________ |
