Hi group I m a passive member of this group and requesting as well inviting any1's responce abut my query . please respond immediatelly need 2day as 2morrow my exam on the same Query:-i tried a lot 2 run AUDIO project which is available on BIOS Folder ,on DSK5510. ---i had given audio i/p from mike using mikein jack of DSK ---I had taken audio out from headphone using headphone out jack of DSk n after bulding,loading .i run the code i m expecting wtever i m given i/p 2 mike i should b able 2 get same as o/p in headphone....... but i m not getting the o/p unable 2 understand y? please help me out its really urgent Alpana Jain GCOEP -pune ________________________________________________________________________ Yahoo! India Matrimony: Find your life partner online Go to: http://yahoo.shaadi.com/india-matrimony |
urgent Question -----need help 4 final presentation
Started by ●December 23, 2004
Reply by ●December 23, 20042004-12-23
The output signal conditioning on that DSK is sutiable to drive a 600 ohm load. However, you may need to use an amplified speaker, i.e., PC external speaker kit, to hear anything on that output. At Thursday, 23 December 2004, jain alpana <> wrote: >Hi group > >I m a passive member of this group and requesting as >well inviting any1's responce abut my query . >please respond immediatelly need 2day as 2morrow my >exam on the same > *snip* ---------------------------------- Zero Crossings, Inc. -- Embedded and Digital Signal Processing Systems http://www.zerocrossings.com/ |
Reply by ●December 23, 20042004-12-23
alpana, Does your board has support for external peripheral, if yes then there might be a jumper setting on DSK that you will have to check. Also, check DSP/BIOS->RTA pannel you have SWI enable and global(??) enable. Hope this helps. Pavan --- jain alpana <> wrote: > Hi group > > I m a passive member of this group and requesting as > well inviting any1's responce abut my query . > please respond immediatelly need 2day as 2morrow my > exam on the same > > Query:-i tried a lot 2 run AUDIO project which is > available on BIOS Folder ,on DSK5510. > ---i had given audio i/p from mike using mikein jack > of DSK > ---I had taken audio out from headphone using > headphone out jack of DSk > > n after bulding,loading .i run the code > > i m expecting wtever i m given i/p 2 mike i should b > able 2 get same as o/p in headphone....... > > but i m not getting the o/p > unable 2 understand y? > please help me out its really urgent > > Alpana Jain > GCOEP -pune ________________________________________________________________________ > Yahoo! India Matrimony: Find your life partner > online > Go to: http://yahoo.shaadi.com/india-matrimony > __________________________________________________ |