Question about MultiDSP

Started by Martin Lopez Vela in TMS320c3x16 years ago 2 replies

Hello! I would like to know, if some one have some information about the company named MultiDSP, I found the reference in the...

Hello! I would like to know, if some one have some information about the company named MultiDSP, I found the reference in the ?DSP Applications using C? a book from R. Chassaing, I am also found their web page ( http://users.aol.com/mult


Re:

Started by Keith E. Larson in TMS320c3x16 years ago

Hello Martin Probably the first and formost thing to mention is that the bootloader is a program running on the DSP. When...

Hello Martin Probably the first and formost thing to mention is that the bootloader is a program running on the DSP. When the VC33 starts in bootloader mode the bootloader code (in the internal ROM) polls the INTx lines to see which ones are active in this order. INT3


Cannot start dsk3d on Win2000 :((

Started by m bastan in TMS320c3x16 years ago 1 reply

Hi, When I invoke dsk3d I always get: TESTING TMS320DSK RESET AT PORT 0x378 (LPT1) >>>>>HPACK (ERROR pin)did not go...

Hi, When I invoke dsk3d I always get: TESTING TMS320DSK RESET AT PORT 0x378 (LPT1) >>>>>HPACK (ERROR pin)did not go high during reset SELECT 1)LPT1 0x378 2)LPT2 0x278 3)LPT3 0x3BC 4)H (help) ............... ....


need a simple loopback fpr C31

Started by m bastan in TMS320c3x16 years ago 2 replies

Hi, Could anyone please tell me how to find a loopback code for C31 to input from codec and output it again. I will appreciate if...

Hi, Could anyone please tell me how to find a loopback code for C31 to input from codec and output it again. I will appreciate if you could send me the code. Thanks a lot.


TMS320C32 => TMS320C33 Porting

Started by Daniel Jose Sandahl in TMS320c3x16 years ago 1 reply

Hello, I'm currently on a project in which we are looking to port an existing program from the TMS320C32 to the TMS320C33. ...

Hello, I'm currently on a project in which we are looking to port an existing program from the TMS320C32 to the TMS320C33. I was wondering if anyone has run into problems doing a port to the TMS320C33 platform. Daniel J. Sandahl


Fw: PID regulator

Started by Sebastian E. Garcia in TMS320c3x16 years ago

Ooops... Now to the list... 8o) S.- ----- Original Message ----- From: "Sebastian E. Garcia" <> | Hi Mikhail and Keith,...

Ooops... Now to the list... 8o) S.- ----- Original Message ----- From: "Sebastian E. Garcia" <> | Hi Mikhail and Keith, | | Also, do a search on TI's site for the University comferences | (I don't remember the link, now). There a


PID regulator

Started by mikhail_iv in TMS320c3x16 years ago 1 reply

Where can I see example of PID regulator realization using VC33? Mikhail.

Where can I see example of PID regulator realization using VC33? Mikhail.


Re:

Started by Keith E. Larson in TMS320c3x16 years ago

Hello Eduardo "Digital Signal Processing with C and TMS320C30" by Rulph Chaissing is a good book, but do keep in mind that...

Hello Eduardo "Digital Signal Processing with C and TMS320C30" by Rulph Chaissing is a good book, but do keep in mind that there are plenty more resources out there. The places that come to mind that will have the highest density of applications include.


profile / view clock working with c33 and Code composer ?

Started by frederic_terrettaz in TMS320c3x16 years ago 3 replies

Hi, Have somebody use the profile/view clock of code composer 4.10.37 with c33 (and the black hawk usb2.0 emulator) ? When...

Hi, Have somebody use the profile/view clock of code composer 4.10.37 with c33 (and the black hawk usb2.0 emulator) ? When I display the variable CLK in the watch window, I see it changing but its value is increasing at a too slow rate. It is unusable for o


initialize tlc32040

Started by cekak2007 in TMS320c3x16 years ago 1 reply

does anyone know how to initialize the tlc32040 in assembly language. my project is to send digital data then using tlc32040 on...

does anyone know how to initialize the tlc32040 in assembly language. my project is to send digital data then using tlc32040 on tms320c31 dsk to convert the data into analog signal. i'm a beginner using the tms320c31 dsk. thank you.


Ask a Question to the DSPRelated community

To significantly increase your chances of receiving answers, please make sure to:

  1. Use a meaningful title
  2. Express your question clearly and well
  3. Do not use this forum to promote your product, service or business
  4. Write in clear, grammatical, correctly-spelled language
  5. Do not post content that violates a copyright