We support many different ADI processors. Does anyone have a procedure that allows VDSP for 21xx, VDSP for Blackfin, VDSP for...

We support many different ADI processors. Does anyone have a procedure that allows VDSP for 21xx, VDSP for Blackfin, VDSP for Sharc etc to peacefully coexist on the same machine? The problem is might be even worse when you consider that some are earlier releases than others.

Hi, I have some difficoulties with vdsp++ 3.5 and EZ-ICE driver. When i have installed vdsp++ 3.5 first time (some years before) everything...

Hi, I have some difficoulties with vdsp++ 3.5 and EZ-ICE driver. When i have installed vdsp++ 3.5 first time (some years before) everything was working fine. But now, i dont know wht had changed but i am getting error masseges after downloading the code to the dsp and trying to singlestep or debug. When i am trying this with different DSP boards and different projects it is the same

Has anyone had experience with the VDSP emulator when you hit a break point and then an interrupt happens? Will the VDSP continue...

Has anyone had experience with the VDSP emulator when you hit a break point and then an interrupt happens? Will the VDSP continue to single step, or does the pc get "stuck"? Thanks for any info! Patience, persistence, truth, Dr. mike

Hi, I have installed ADSP-21160(M) Ezkit (having Parallel interface) from SpectrumSignal on VDSP++3.0. But the talk-through...

Hi, I have installed ADSP-21160(M) Ezkit (having Parallel interface) from SpectrumSignal on VDSP++3.0. But the talk-through program when I am compiling is giving error, as the talk-through was written for VDSP-4. 1. version. VDSP++3.0 has a talk-through program for 21160 Ezkit

Hi all i recently downloaded VDSP ++ 3.0 from ADI's site. after installing both VDSP and license, i tried to run some project. ...

Hi all i recently downloaded VDSP ++ 3.0 from ADI's site. after installing both VDSP and license, i tried to run some project. while the tool is able to biuld the file but when i do rebuild all tool doesnt create dxe file.its is creating doj files. it shows the fol

Hi! I have that EZ-LAB (the one on "subject") and recently downloaded the VisualDSP++ 2.0 for 21XX development environment, and...

Hi! I have that EZ-LAB (the one on "subject") and recently downloaded the VisualDSP++ 2.0 for 21XX development environment, and also installed the 2181_EZ_KIT_TOOLS_2.00.0 software for using the EZ-LAB within VDSP++2.0. With VDSP ver 7.0 it worked fine, but with VDSP++2.0 i just a get a bulk of proble

Ah, I'm a researcher with BF533. Before I always used Summit-ICE Emulator with VDSP++3.5 for my research, but now when I updated my IDDE to...

Ah, I'm a researcher with BF533. Before I always used Summit-ICE Emulator with VDSP++3.5 for my research, but now when I updated my IDDE to VDSP++4.5, I can't found the proper driver or configuration under 4.5 environment. So I'd like to know if my Summit-ICE can still work under 4.5 IDDE. Any one help me? Thanks!

hi i'm new to VDSP++ don't know programming in vdsp & wants to implement IIR bandpass filter with following specifications stopband edges:...

hi i'm new to VDSP++ don't know programming in vdsp & wants to implement IIR bandpass filter with following specifications stopband edges: fs1=2.6khz , fs2=3.8khz pass band edges: fp1=2.3khz, fp2=4.1khz sampling frequency: Fs=48khz i have matlab code how to convert this matlab code to langauge compatible with VDSP++ 4.5 __________________________________________________

hi all, i have written program using simple file opening and closing it in VDSP++, but file is not created in the respective project. i doubt...

hi all, i have written program using simple file opening and closing it in VDSP++, but file is not created in the respective project. i doubt i'm missing some header file or something else please do tell me what is it. for reference here i'm giving a small part of a program(very simple one) using file io operations. i'm working in BF533 session of VDSP++. if the src.c, is created somewh...

Hello all, Is there anyone that tried to change the default open/load directory of VDSP++? Specifically, when I want to open a project or...

Hello all, Is there anyone that tried to change the default open/load directory of VDSP++? Specifically, when I want to open a project or load an executable to DSP, VDSP++ opens default a directory which I was not asked during the installation and which I was not able to change it from the IDDE. I generally put my codes to another partition (say, D) in my Windows system for my projects to...

Hello, I have tried to run my EZKIT-Board under the VDSP++ 2.0 (on WIN NT- PC) without the EZKIT-Download Software 4.0, but it...

Hello, I have tried to run my EZKIT-Board under the VDSP++ 2.0 (on WIN NT- PC) without the EZKIT-Download Software 4.0, but it don't discover the board. Is this problem solved under VDSP++ 3.0?? If I overinstall EZ KIT-4.0 the GNU-Compiler makes problem in recognize the

Hello, I am just wondering if there any mapping about the header file between the VDSP++ and Linux? I am asking because i need to port...

Hello, I am just wondering if there any mapping about the header file between the VDSP++ and Linux? I am asking because i need to port a linux base driver/device_driver to the VDSP++. But all the info that i can find or search is only how to port things to linux and not in the opposite way. Anyone have an answer for this? Thank you.

Hello! I'm using an EZ KIT LITE 21065L demo board with VDSP++ 4.5. In most of the listings in the app note AN-1819 the header file...

Hello! I'm using an EZ KIT LITE 21065L demo board with VDSP++ 4.5. In most of the listings in the app note AN-1819 the header file "new65Ldefs.h" is used. The listings are written for VDSP++ 4.x but I can not find this header file in my 4.5. Does anyone know where to find this file? Best regards Timo Guelck

Hai all, I'm using VDSP-4.0 for SHARC 21065 processor. In assembly i'm able to initialize a data to an array through the...

Hai all, I'm using VDSP-4.0 for SHARC 21065 processor. In assembly i'm able to initialize a data to an array through the following code .segment/dm seg_dmda; .var array1[5]="1.dat"; .endseg; But the same to be done in C coding. Kindly give me the solution for the same. regards, sendhil

When working with complex project with multiple dependencies in Analog Devices VDSP, it is necessary to include the project group file into...

When working with complex project with multiple dependencies in Analog Devices VDSP, it is necessary to include the project group file into version control. However, as VDSP automatically updates the time/date record inside the group file at every session, it causes the annoying conflicts at version control all the time. Is there a good way to avoid this type of behavior? We are using ...

I am running Analog Devices VDSP 4.0.5.0. I have not found a way to automatically create a .mk file given that I already have a .dpj file. The...

I am running Analog Devices VDSP 4.0.5.0. I have not found a way to automatically create a .mk file given that I already have a .dpj file. The only way it seems I can do this is via the IDE. Is this a limitation of the product, or is there a workaround? Thanks, CC

hii everybody i am having vdsp++3.5 ver. can somebody guide ne how to make code developed in vdsp++3.1 ver compatible. what r the changes i...

hii everybody i am having vdsp++3.5 ver. can somebody guide ne how to make code developed in vdsp++3.1 ver compatible. what r the changes i should make on that code like (LEGACY IDENYIFIER) Yahoo! Photos ? Showcase holiday pictures in hardcover

Hi, I was looking to develop a code strip the header details in the .wav file & convert it into a .dat file. I have the C code which does...

Hi, I was looking to develop a code strip the header details in the .wav file & convert it into a .dat file. I have the C code which does this in VC++, which runs well. But since the data types in VDSP++ are all 4 bytes, I cannot read the data in a .wav file byte by byte. Do you have a code which works in VDSP++ (converting .wav to .dat)? Can u suggest something?

> hi! > can any one who worked > on adsp sharc21065l can give me > guideline how can i start programming. > vdsp is 3.5. ...

> hi! > can any one who worked > on adsp sharc21065l can give me > guideline how can i start programming. > vdsp is 3.5. > with regards > zhyanki > Hi Zhyanki, look into samples directory in VDSP distribution.

Hello, I have just started working with the SHARC DSP recently and have mainly been using C++ through VDSP++. However, now I am...

Hello, I have just started working with the SHARC DSP recently and have mainly been using C++ through VDSP++. However, now I am trying to write some simple mathematic tests in assembly, just to check some of the ALU ops that I'm not sure how to check through C and to become familiar