hi, I would like to use a watch dog and I don't find the watchdog function. Does this function exist for a real time...

hi, I would like to use a watch dog and I don't find the watchdog function. Does this function exist for a real time application without RTDX? If not, is there an easy way to design this function. thanks stephane

Hi! I used the DSK 6711 to deal with the pattern recognition and classify it into two features. The algorithm of pattern recognition...

Hi! I used the DSK 6711 to deal with the pattern recognition and classify it into two features. The algorithm of pattern recognition includes median filtering, low pass filtering, and connected commponent labeling etc. Furthermore I also use an interupt to make RTDX, deriving an image to do pattern recognition by the video daughter board of enfochips, a

Hi, Soon i will implement a video compression algorithm on DM642. I'd like to recover the compressed data, which will be stored in...

Hi, Soon i will implement a video compression algorithm on DM642. I'd like to recover the compressed data, which will be stored in SDRAM, in order to be able to replay the video on the PC. Can you tell me if Code Composer allows us to recover data stored in external memory and to save them in a file on the PC ? Does RTDX allow to do that ?

I thought some of you in this group might be interested in a new featured article in CMP Media's Video/Imaging Design Line, " Gamma correction...

I thought some of you in this group might be interested in a new featured article in CMP Media's Video/Imaging Design Line, " Gamma correction of RGB images using TI DSPs" .   The article can be accessed at http://www.videsignline.com/h owto/videoprocessing/1649005

hi how much is your data amount and which is your target and your interface(parallel PCI or usb)? I have also this problem but my data...

hi how much is your data amount and which is your target and your interface(parallel PCI or usb)? I have also this problem but my data amount is above 1024 bytes pereach transfer and the time out error message occures. you can change the timeout amount by 'set' function in MATLAB. or you can enable ,open close and disable every channel in every itteratio

is it possible to transfer the image from the target(TMS320C6711) to the computer thru RTDX? if possible, plz tell me how to transfer the...

is it possible to transfer the image from the target(TMS320C6711) to the computer thru RTDX? if possible, plz tell me how to transfer the image and the procedures plz...

Hi, I am trying to speed up the File Read and Write capability on the C6455 DSK. Using fread and fwrite the processing of data is extremely...

Hi, I am trying to speed up the File Read and Write capability on the C6455 DSK. Using fread and fwrite the processing of data is extremely slow for large data files. Does anyone know if Probepoints or RTDX improves this and if so how easy is it to use on this DSK? Thanks Andy

Hello Sir, As per your reply EducationalDSP HPI interface card may not be available in college. So though it seems foolish i am asking again...

Hello Sir, As per your reply EducationalDSP HPI interface card may not be available in college. So though it seems foolish i am asking again weather RTDX through JTAG can not do this through log files? This i have not read completly but came across this day back. Regards, Nilesh Jeff Brower wrote: Nilesh- > I am doing host to target communication part of my project.

Nilesh- > As per your reply EducationalDSP HPI interface card may not be available in > college. It's not expensive, USD 85. > So though...

Nilesh- > As per your reply EducationalDSP HPI interface card may not be available in > college. It's not expensive, USD 85. > So though it seems foolish i am asking again weather RTDX through JTAG can not do > this through log files? This i have not read completly but came across this day So you're thinking like this: _______ | | CCS ---->

Greetings all, I am working on an experiment to demonstrate pulse shaping and bit error rate. The platform is DSK6711, using CCS2.2 and...

Greetings all, I am working on an experiment to demonstrate pulse shaping and bit error rate. The platform is DSK6711, using CCS2.2 and Matlab. The idea is simple: random bits are generated through a PN sequence generator, then they are "slowed down" by decimation (to 6kbps), a pulse-shaping filter is applied (sqrrcos) on what would be a transmitter, gaussian noise is added, then a matched...

Question - I can debug my C6414 target fine, but if I try to use any of the profiling tools like statistics view or cpu load graph, then CCS...

Question - I can debug my C6414 target fine, but if I try to use any of the profiling tools like statistics view or cpu load graph, then CCS 3.1 locks up on me and I have to kill it via task manager. Anyone know if there is there some trick to getting these tools to work? i.e. some interrupt that needs to be enabled for RTDX or something? (I am using 4.9 BIOS.) Thanks!

Hi all, i need to make my c64x dsk to communicate with pc. Board is connected trough USB. What are the possible methods? RTDX is my first...

Hi all, i need to make my c64x dsk to communicate with pc. Board is connected trough USB. What are the possible methods? RTDX is my first choiche, is there something else and more useful? My dsk is equipped only with USB connector, no ethernet or other stuff. Thanks Emiliano

Hi, I am using RTDX Channels to input data to the C6713 processor. I believe it goes initially to the internal memory (64K) but since the data...

Hi, I am using RTDX Channels to input data to the C6713 processor. I believe it goes initially to the internal memory (64K) but since the data to be sent is larger in size I need to take it to some other memory space. Can anyone help me doing this i.e. shifting data from internal memory to some other place. Faraz

dear all, i had finished my model in simulink and i want to built the code on dsk c6713. when i had build and download my model succesfully on...

dear all, i had finished my model in simulink and i want to built the code on dsk c6713. when i had build and download my model succesfully on ccs but when i want to run my host model to verivy the output process from dsk c6713 i always get this error messages : "Error evaluating registered method 'Outputs' of M-S-Function 'sfcn_TargetToHost' in 'gain1_host_c6416_frames/RTDX Read'. Read RTD...

Hello, I am using CCS 3.3 and try to use Host Channels (for input, dataflow is Host-> Target). Therefore I created in the BIOS a new HST....

Hello, I am using CCS 3.3 and try to use Host Channels (for input, dataflow is Host-> Target). Therefore I created in the BIOS a new HST. Mode is input, bufseq is DDR2, bufalign is 4, framesize (words) is 1 and numframes is 1. The HST uses RTDX, which is enabled. The I try to bind the HST to a file. The file created with the following c-code: FILE *f=fopen("data.dat", "wb"); int

Hi all! I am sending signal's samples from my LabView application to C6711DSK for computing FFT-radix4. Data transfer works correctly...

Hi all! I am sending signal's samples from my LabView application to C6711DSK for computing FFT-radix4. Data transfer works correctly when the number of samples is equal or less than 128 but If it is bigger then CCS shows me the following message: ------------------------------------------------------------------------------------------------ -----------------------------------------------

Hi, I am having a problem.I want to interface the DSK to Matlab for online operation (like generating rand number from matlab and...

Hi, I am having a problem.I want to interface the DSK to Matlab for online operation (like generating rand number from matlab and giving it to DSK for system identification like problems) by using RTDX. But i am not able to understand from where to start. if anybody have information please share with me. Thanks, Sagar Check Out Industry's First Single-Chip, Mult...

Hi, can anyone please help me. I have been trying to solve this problem for a long time but still cant the solution. I'm using ccs 2.2. I doing...

Hi, can anyone please help me. I have been trying to solve this problem for a long time but still cant the solution. I'm using ccs 2.2. I doing a project of a audio realtime equalizer with vb and i can't solve the rtdx_read problem. Thanks in advance. #include "rtdx_vbloopcfg.h" #include "dsk6416_aic23.h" //codec-DSK support file #include #include "target.h" Uint32 fs=DSK6416

Hi, sorry for the repost i forgot to paste the error message. I'm usng ccs 2.2. Can anyone help me please. Thank you. #include...

Hi, sorry for the repost i forgot to paste the error message. I'm usng ccs 2.2. Can anyone help me please. Thank you. #include "rtdx_vbloopcfg.h" #include "dsk6416_aic23.h" //codec-DSK support file #include #include "target.h" Uint32 fs=DSK6416_AIC23_FREQ_48KHZ; //set sampling rate int gain = 1; RTDX_CreateInputChannel(control_channel); interrupt void c_int11()

Hi, if i use HST module instead of pure RTDX to exchange data between host and target, what is the "name" of those channels to be used in my...

Hi, if i use HST module instead of pure RTDX to exchange data between host and target, what is the "name" of those channels to be used in my client program on PC? In "hostio2" tutorial example there are two HST channels: "input_HST" and "output_HST". But these names don't work in Visual Basic program "signalprog" from hostio1 example when simply substituted for "D2A_channel" and "A2D_channel". T...