Hi, I have some question about Interface DSK6711 to PC. As I know there are only two ways to interface DSK6711 to PC, One is LPT1 ...

Hi, I have some question about Interface DSK6711 to PC. As I know there are only two ways to interface DSK6711 to PC, One is LPT1 using EPP mode and the other is JTAG which could use XDS510 or XDS560. I have problem that I want to send image frame(640x480) from DSK6711 t

Hi, Can some one help me to get PAL contents for DSK6711. I would like to know what is inside (I don't have DSK6711 itself) ...

Hi, Can some one help me to get PAL contents for DSK6711. I would like to know what is inside (I don't have DSK6711 itself) Best Regards, Veniamin Milevski PS! How I can change "veniamin2002se" to my real name? :)

I understand that this post is very old but can i ask you how do you program the comunication trogh hpi? Could you help me suggsting me doc, code,...

I understand that this post is very old but can i ask you how do you program the comunication trogh hpi? Could you help me suggsting me doc, code, your experience or something? > > > > Hi, I have some question about Interface DSK6711 to PC. As I know > there are only two ways to interface DSK6711 to PC, One is LPT1 > using EPP mode and the other is JTAG which could use XDS510 or

emda data tranfer from matlaba file to dsk6711 I want to transfer a data file from matlab with 1-D constants 3500 bytes to my...

emda data tranfer from matlaba file to dsk6711 I want to transfer a data file from matlab with 1-D constants 3500 bytes to my dsk6711 with edma transfer mode and to be output to 1-d again without any modulation. I used simulink with ccs and i failed. If any can help me Its very important for my project thanks

Dear Group Members I am a new user of DSK6711 i have made some image processing applications by using dsk6711 using CCS V2.2....

Dear Group Members I am a new user of DSK6711 i have made some image processing applications by using dsk6711 using CCS V2.2. Now i want to load my code in ROM, which can execute without CCS. But unlikely i am unable to do that, even i read many manuals on standalone appl

Dear all, I have some problem related to Power Supply and Ground in Daughter Board and DSK6711. Currently I am using DSK6711 as...

Dear all, I have some problem related to Power Supply and Ground in Daughter Board and DSK6711. Currently I am using DSK6711 as main board and CMOS Sensor+FIFO+FPGA as the daughter board. My CMOS Sensor power is 5 V, FIFO is 3.3 V and FPGA is 5 V. All power of the CMOS Sensor,

Hi, I want to connect my rs232 mouse (converted to TTL voltages) to DSK6711, how can I do that? Is there any I/O in dsk6711 (in DB pins)? ...

Hi, I want to connect my rs232 mouse (converted to TTL voltages) to DSK6711, how can I do that? Is there any I/O in dsk6711 (in DB pins)? what is the purpose of DB-CNTL and DB-STAT in DB slot of dsk6711 and what are their addresses? please help me. thanks

Dear all, I just ported my code from DSK6711 to DSK6416. Actually my code is use for counting optical flow. When I use DSK6711,...

Dear all, I just ported my code from DSK6711 to DSK6416. Actually my code is use for counting optical flow. When I use DSK6711, the time for counting one optical flow field is 1.3 sec (greater than 1 Hz). Because I want to make real time application, the optical flow at

Hi all! I'm looking for some tutorial or help on using audio in DSK6711. anything will be helpful Thanks alot!

Hi all! I'm looking for some tutorial or help on using audio in DSK6711. anything will be helpful Thanks alot!

hi , i am new to DSK6711, i know how 2 install it, check it and make prjs. i have run some programs too, but i need some basic...

hi , i am new to DSK6711, i know how 2 install it, check it and make prjs. i have run some programs too, but i need some basic kinda experiments in C, so that I can learn how to operate it. actually the thing that I have to do is" to get sound input via microphone, to process it, and to li

Hi, I just bought ADS8364EVM for my project, and I fixed this EVM on DSK6711. A sine wave signal was applied from function...

Hi, I just bought ADS8364EVM for my project, and I fixed this EVM on DSK6711. A sine wave signal was applied from function generator to one channel on EVM. so my question is how to get the output signal by using CCS, and I have used the example from ti website (SLAA1

dear all i need a dsk6711 user's manual is anyone that can give me this manual? thanks bye

dear all i need a dsk6711 user's manual is anyone that can give me this manual? thanks bye

Hi everybody, I have a simple question. I am using the DSK6711 which has an AD535 on board. The AD535 has the sampling frequency limited...

Hi everybody, I have a simple question. I am using the DSK6711 which has an AD535 on board. The AD535 has the sampling frequency limited to 8 Khz. Does this also mean that i will be unable to play out audio through the ad535 at a higher frequency, or is it just that the input analog signal will be sampled only at 8 Khz? Thanks and regards -Sunil

Hi, Can I use time-frequency analysis in CCS using dsk6711 and get the output in graphic display, please help. Medris ...

Hi, Can I use time-frequency analysis in CCS using dsk6711 and get the output in graphic display, please help. Medris

Hi everebody, I have some problems with the audio in of dsk6711. I want to use Microphone to receive voice but I couldn't achieve it I...

Hi everebody, I have some problems with the audio in of dsk6711. I want to use Microphone to receive voice but I couldn't achieve it I couldn't hear voice from speaker out.Instead of this,I tried to use PC soundcard out as input to DSK.I heard voice.How can i do this using microphone ? Best regards... Emir

My project for dsk6711 is to build a system that do fft of a signal and visualize graph of modulo and phase. The core of application is done, so...

My project for dsk6711 is to build a system that do fft of a signal and visualize graph of modulo and phase. The core of application is done, so i have fft modulo and phase of the samples. Now the visualization: i have some ideas: - RS232: but how i connect it to DSK6711? There is not a port like in the DSK5402. I know there are 2 McBsp 0 and 1. The codec use only one, McBsp0 and the control p...

Excuse me but how do you program your dsk with linux? If you can reply to me I'll stop to stole my dad's pc with Xp..Ok not with code composer...

Excuse me but how do you program your dsk with linux? If you can reply to me I'll stop to stole my dad's pc with Xp..Ok not with code composer studio, and how? Wine for some terminal program like c16? ok for the compiler. And for linker and loader? It is possible to use DSP/BIOS and all the files created with CCS ? bye!! > > > > > Hello, > > I've got a DSK6711 board connected

Hello Everebody, I have problem about audio capturing with Dsk6711. I want to use Microphone to receive voice but I couldn't achieve it I...

Hello Everebody, I have problem about audio capturing with Dsk6711. I want to use Microphone to receive voice but I couldn't achieve it I couldn't hear voice from speaker out.Instead of this,I tried to use PC soundcard out as input to Dsk.I heard voice.How can i do this using microphone ? Best regards... Emir

Hi friends I want to connect (read and write) a bidirectional line to McBSP of DSK6711: 1- How can I use McBSP to drive a...

Hi friends I want to connect (read and write) a bidirectional line to McBSP of DSK6711: 1- How can I use McBSP to drive a bidirectional line? 2- How can I use a McBSP to drive two bidirectional lines? 3- Have you ever connected PS/2 mouse (or any other types) to DSK6711? thanx

Hi..! Im using a dsk6711 and I made an OFDM system on it.! tx and rx for the IEEE 802.16 standard. So my system works perfectly but i would...

Hi..! Im using a dsk6711 and I made an OFDM system on it.! tx and rx for the IEEE 802.16 standard. So my system works perfectly but i would like to simulate a channel for the OFDM signal.! I've desing all the blocks for the OFDM system and now i've to pass my signal trough a multipath channel before I receive it.! here is the thing after the IFFT the signal is in time domain, so I've to make ...