Forums More code-comp
help on grabing input signals
Hi Frnds, I have a DSP board which has an ADC and a DAC, a FPGA to control the flow of signals and access the onboard memory and a...
Hi Frnds, I have a DSP board which has an ADC and a DAC, a FPGA to control the flow of signals and access the onboard memory and a TMS320C6416 DSP chip to do the processing on it. We bought this board from Sundance Corporation Inc., a company into making DSP boards. I need to grab input signals from a source through the ADC, do some processing on it and get the digital outputs of
How to use clock() function to get the processing time
HI, all DSP friends I am using C6711 Device Cycles Accurate Simulator in CCS 3.0 IDE. I want to use clock() function to obtain...
HI, all DSP friends I am using C6711 Device Cycles Accurate Simulator in CCS 3.0 IDE. I want to use clock() function to obtain processing time of a code, I used a sample code from CCS manual , but can not get the desired results, the result is always 0. The following is the code. Anybody can give me some hint about using clock() function to get
Error message about unaccess.h file
Hi, all DSP experts. I am using C67xx CPU Cycles Accurate Simulator to run a code under CCS 3.0 IDE. A funny error message appeared...
Hi, all DSP experts. I am using C67xx CPU Cycles Accurate Simulator to run a code under CCS 3.0 IDE. A funny error message appeared as following when I compile my code . Please pay attention to the message in red. Why does compiler point out a error in unaccess.h file and stdlib.h? I never use this header file unaccess.h in my code, and st
CCS 3.1 does not work with DSP/BIOS projects under Windows XP with standard user privileges.
inCCS 3.1 does not work with DSP/BIOS projects under Windows XP with standard user privileges. I just upgraded CCS from 2.21 to 3.1...
CCS 3.1 does not work with DSP/BIOS projects under Windows XP with standard user privileges. I just upgraded CCS from 2.21 to 3.1 on a PC that runs Windows XP Professional with SP2. I must use this system with standard user privileges. Installation worked without
Re: [c6x] How to prepare a data for use with probe in CCS
inThe .dat file should have some header info. The header would indicate to the probe, the format of the data stored in the dat file. It can be...
The .dat file should have some header info. The header would indicate to the probe, the format of the data stored in the dat file. It can be any one of: Hexadecimal, Integer, Long and Float. --Bhooshan From CCS user manual: The header information for data files uses the following syntax
Message Window Updates
inWe're seeing some erratic operation in how CCS updates the Message Log window. Normally we'll get messages are they occur. Sometimes...
We're seeing some erratic operation in how CCS updates the Message Log window. Normally we'll get messages are they occur. Sometimes however, we'll see none, but all will be displayed when we terminate program execution. I've tried putting in TSK_sleep statements etc, but they don't seem to help. Any Ideas? Thanks Mark
error message-data verification failed
inHi All, I am new to CCS. I am using the TI CCS v3.1 on a TMS320C6416 processor. I am trying to run a project named maxminmath in the CCS...
Hi All, I am new to CCS. I am using the TI CCS v3.1 on a TMS320C6416 processor. I am trying to run a project named maxminmath in the CCS folder. This project creates a library file and integrates with the main application. The build of the project gives no error. But when I try o load it onto the processor board, it gives the following error message: Data verificatio
Emulator Error
inHi, I am working on OMAP 1510 Innovator board using XDS560. On powering up the target I run the Reset XDS560 utility from the PC and then ...
Hi, I am working on OMAP 1510 Innovator board using XDS560. On powering up the target I run the Reset XDS560 utility from the PC and then start CCS. I get the following error: TMS470R2x- DSP Device Driver Cant Initialise Target CPU: Error 0x80000200/-2072 Fatal Error during: OCS, Cannot halt the processor The switch settings o
NO CHIP DEFINED
insorry, I forgot where I have to define the dsp chip on the code composer studio, I read about it, I was using the examples programs, varying...
sorry, I forgot where I have to define the dsp chip on the code composer studio, I read about it, I was using the examples programs, varying these programs but without modified that (the chip defined), but I had just forgotten how define it. thanks
Special Announcement: GSPx 2005
GSPx is the major (digital and analog) signal processing technology forum and product exposition covering DSPs, mixed-signal and analog ...
GSPx is the major (digital and analog) signal processing technology forum and product exposition covering DSPs, mixed-signal and analog products, EDA tools, software and applications. This year's event will cover the latest technology in video compression, cellular, software defined radio (SDR), multi-core/multiprocessors, and much more. Keynote Speakers:
Ask a Question to the DSPRelated community
To significantly increase your chances of receiving answers, please make sure to:
- Use a meaningful title
- Express your question clearly and well
- Do not use this forum to promote your product, service or business
- Write in clear, grammatical, correctly-spelled language
- Do not post content that violates a copyright