DSPRelated.com

c6713, Chassaing Example and UART Daughtercard

Started by awil...@hotmail.com in TMS320c6x18 years ago

Hi folks I have a c6713 DSK and a UART Daughtercard from Windmill Innovations. I want to Tx the value of a potenciometer, connected to a...

Hi folks I have a c6713 DSK and a UART Daughtercard from Windmill Innovations. I want to Tx the value of a potenciometer, connected to a microcontroller's AD and send this value to the DSK through this UART Daughtercard. I'm using the example program loop_intr from the Chassaing book "Digital Signal Processing and Applications with the C6713 and C6416 DSK", this program is an interrupt-driven u...


error in example 2.1 of rulph chassaing book

Started by waji...@hotmail.com in TMS320c6x18 years ago

hi,everyone.I am using tms320c6713 DSK.i tried to run exaple 2.1 "Loop_intr.c".of chassaing's book "Digital Signal Processing and Applications...

hi,everyone.I am using tms320c6713 DSK.i tried to run exaple 2.1 "Loop_intr.c".of chassaing's book "Digital Signal Processing and Applications with the C6713 and C6416 DSK". Following error occured ""c:/ti/c6000/bios/include/csl_chiphal.h", line 206: fatal error: #error NO CHIP DEFINED (use -dCHIP_XXXX where XXXX is chip number, i.e. 6201) 1 fatal error detected in the compilation of "Loop...


Re: Announcing New Book by Rulph Chassaing

Started by rlyq...@gmail.com in TMS320c6x19 years ago

Hello, I recently bought Dr. Rulph Chassaing's new book "Digital signal processing and applications with the C6713 and C6416 DSK" and a...

Hello, I recently bought Dr. Rulph Chassaing's new book "Digital signal processing and applications with the C6713 and C6416 DSK" and a C6713 DSK from spectrum digital. I have been trying to following the examples in the book, but run into one issue. I was able to load and run sine8_LED.out from the CD successfully. I was also able to following example 1.1


Inconsistent failure programming C6713 DSK with CCS 3.1

Started by ldel...@gmail.com in TMS320c6x16 years ago 7 replies

Hi All, I have purchased the book "Digital Signal Processing and Applications with the C6713 and C6416 DSK (by Rulph Chassaing, 2005)" as a...

Hi All, I have purchased the book "Digital Signal Processing and Applications with the C6713 and C6416 DSK (by Rulph Chassaing, 2005)" as a reference to implement digital signal processing routines using the C6713 DSK and CCS 3.1. I have successfully executed the examples provided by Dr. Chassaing in chapters 1 e 2, but with some minor modifications due to warning messages that appeared when I ...


Re: [Using EMIF expansion port as digital output_ finally :)

Started by Jeff Brower in TMS320c6x14 years ago

Saadeq- > http://e2e.ti.com/support/dsp/tms320c6000_high_performance_dsps/f/115/p/74705/271855.aspx#271855 Very glad to hear you got it...

Saadeq- > http://e2e.ti.com/support/dsp/tms320c6000_high_performance_dsps/f/115/p/74705/271855.aspx#271855 Very glad to hear you got it working! Persistence and perseverance count for half (or more) in engineering. I found that on pg 362 of Rulph Chassaing's book there is a mention of pin 75: http://books.google.com/books?id=hrlRFMh-dgYC&pg=PA362&lpg=PA362&dq=rulph+chassaing+Pin+75&so


could not open source file

Started by murs...@yahoo.com in TMS320c6x18 years ago 3 replies

I have started to study with Dr. Rulph Chassaing's new book

I have started to study with Dr. Rulph Chassaing's new book


stereo input-output independently

Started by murs...@yahoo.com in TMS320c6x18 years ago 4 replies

At the (DSP Appl. with C6713 and 6416 )book, Dr. Chassaing says in CHP 2 Ex 2.3:

At the (DSP Appl. with C6713 and 6416 )book, Dr. Chassaing says in CHP 2 Ex 2.3:


Radix-4 FFT with frequency domain filtering on DSK C6713

Started by v r in TMS320c6x14 years ago 13 replies

Hello All, Am trying to implement this project which was mentioned in 10.4 from Rulph Chassaing book. But so far am unsuccessful with bunch...

Hello All, Am trying to implement this project which was mentioned in 10.4 from Rulph Chassaing book. But so far am unsuccessful with bunch of build errors. Has anyone able to run this program on board successfully? Thanks, Victor


Interrupts ???

Started by tamas_harczos in TMS320c6x21 years ago

Hi again, the code above is a slightly modified version of an example program from Mr. Chassaing. My problem is the following:...

Hi again, the code above is a slightly modified version of an example program from Mr. Chassaing. My problem is the following: if I start the IRQ (11), the code between the while brackets in main function doesn't seem to run at all. What's wrong? ----------------


anybody have c6713dskinit.c file

Started by ananthula madhusudhanreddy in TMS320c6x16 years ago

HI iam working on c6713dsk board for a month.iam following "rulph chassaing book" in that to test some sample programs i need to include this...

HI iam working on c6713dsk board for a month.iam following "rulph chassaing book" in that to test some sample programs i need to include this support file to my sourcefile so if anyone having it kindly mail me. advanced thanx regards, A MADHU REDDY


Linking error in Sine8_led

Started by lanc...@yahoo.com in TMS320c6x15 years ago 3 replies

Dear all I recently acquired a TMS320C6713 and the code composer V 3.1 along with it, for the purpose of my final year thesis for my...

Dear all I recently acquired a TMS320C6713 and the code composer V 3.1 along with it, for the purpose of my final year thesis for my undergraduate course. I also bought Digital Signal and Processing with C6713 by Rulph Chassaing. I was trying the first example Sine8_led. I followed all his instructions and while compiling I got the following message: --------------------------- Sine8_led...


dsk6416_led.h and dsk6416_dip.h

Started by sime...@gmail.com in TMS320c6x15 years ago

Hi, I'm reading the book of Rulph Chassaing, Digital Signal Processing and Applications wih the C6713 and C6416 DSK. In section 9.1, example...

Hi, I'm reading the book of Rulph Chassaing, Digital Signal Processing and Applications wih the C6713 and C6416 DSK. In section 9.1, example 9.1 the author uses two library files: dsk6416_led.h and dsk6416_dip.h. I was trying to find them either in the accompanied CD or in the Internet, but nothing. Is there anything I could do? Thanks in Advance ____________________________________...


who has this DSP book by Rulph Chassaing ??

Started by shia_son in TMS320c6x21 years ago 1 reply

hi , i think some of you should have this book .. i dont have it , but i heard alot about it ,, there is a section talks about...

hi , i think some of you should have this book .. i dont have it , but i heard alot about it ,, there is a section talks about students project and some ready made staff .. my question is : are they a complete version examples and are they included in the cd that comes with the


system identification

Started by sham...@yahoo.co.uk in TMS320c6x15 years ago

hi everybody, i am using the tms320c6713 Dsp and i have also tried several examples found in the book Digital Signal and Processing with C6713 by...

hi everybody, i am using the tms320c6713 Dsp and i have also tried several examples found in the book Digital Signal and Processing with C6713 by Rulph Chassaing. However, i am having some problem with the example adaptIDFIR on system identification. I successfully built the program but now i want to use rtdx with matlab.I simply dont know how to do this.By the way, i am donig a project on feedba...


adaptive filters

Started by sham...@yahoo.co.uk in TMS320c6x15 years ago

Hello Everyone, I am currently trying to disply the graph for "adaptIDFIR" (chap 7 of DSP and Applications with the C6713 and C6416 by Rulph...

Hello Everyone, I am currently trying to disply the graph for "adaptIDFIR" (chap 7 of DSP and Applications with the C6713 and C6416 by Rulph Chassaing) but it doesn't graph anything. I am not sure whether windowing option I did was not correct or there's certain options that I missed. I'm using C6713 board. the program was succesfully built but after loading the program when i wanted ...


Re: looking for Dr. Ralph Chassaing book's CD-ROM

Started by zeme...@yahoo.com in TMS320c6x16 years ago 1 reply

Michael and Jeff, Thank you for your Cooperation and understanding my problem. I have followed the steps that Micheal listed out and I have...

Michael and Jeff, Thank you for your Cooperation and understanding my problem. I have followed the steps that Micheal listed out and I have found the whole CD-ROM from the publisher website. And you are right Micheal it was a very simpe problem that should have been solved easly. I understood that it is because I prefered others to slove my problem for me which I would have done it. Than...


matlab interface with ccs problem

Started by chirag_jagadish in TMS320c6x19 years ago

hello everybody, i am new to this group so first of all i would like to say hello to everybody i had to do a project in which i wanted...

hello everybody, i am new to this group so first of all i would like to say hello to everybody i had to do a project in which i wanted to send a large matrix(image file) to 6713 for which i wanted to use matlab i used the program in Dr Rulph Chassaing's book example 9.6 - MATLAB DSK interface for FIR implementation to test the communication


vector file

Started by John Lai in TMS320c6x20 years ago 1 reply

Hello all, I am a beginner and using chassaing's book. The kit I am using is C6711. I appreciate if I can have feedback on a...

Hello all, I am a beginner and using chassaing's book. The kit I am using is C6711. I appreciate if I can have feedback on a few basis questions: Q1/ all interrupt driven programs must have a *.asm (eg. vector.asm file). Correct? ie. If the program use polling, I


C6713 board - problem with LCD

Started by pajhiwo1 in TMS320c6x17 years ago 1 reply

I'm trying to run the title board with LCD 2*16 via EMIF. I have the book of Mr. Rulph Chassaing and there is an example with LCD but it doesn't...

I'm trying to run the title board with LCD 2*16 via EMIF. I have the book of Mr. Rulph Chassaing and there is an example with LCD but it doesn't work. I have some experience with programming PIC microcontrollers bud not DSP processor. I know there is a lot of problems with time depandancies but have no idea how to start. Does anybody have any example program which can help me understand it or...


I have a problem Graphing the result.

Started by tcsnorm in TMS320c6x18 years ago

Hello Everyone, I am currently trying to disply the graph for "adaptnoise_2IN.c" (chap 7, pp 269 of DSP and Applications with the C6713 and...

Hello Everyone, I am currently trying to disply the graph for "adaptnoise_2IN.c" (chap 7, pp 269 of DSP and Applications with the C6713 and C6416 by Rulph Chassaing) but it doesn't graph anything. I am not sure whether windowing option I did was not correct or there's certain options that I missed. I'm using C6713 board. Can anyone help me out with this? I am so new to this DSP board...