Ivan, I use some different emulators, but not Spectrum Digital. see comments below. On Thu, Jul 10, 2008 at 8:08 AM, Ivan wrote: > ...

Ivan, I use some different emulators, but not Spectrum Digital. see comments below. On Thu, Jul 10, 2008 at 8:08 AM, Ivan wrote: > Hi Mike, > > I would like to ask something that has bothered me for a while and > has been hindering me from progressing my project. > > Previously, when I used the Code Composer Studio v 3.1 I could use > the USB jtag emulator built

Hello All, while using my XDS560 PCI emulator (by seed), my code composer got halted. Now emulator is not responding as expected. i tried to...

Hello All, while using my XDS560 PCI emulator (by seed), my code composer got halted. Now emulator is not responding as expected. i tried to diagnose it using "XDS560 Diagnostics" but it give following error. ********** Test XDS560 memory ********** INFO??? 1 XDS560 adapter boards detected ??? [adapter 0] Memory access tests on IPM [adapter 0] Memory access tests on IDM ERROR??? [ada...

I am looking for a telephone network emulator for the testing of a v.34 or v.90 modem. Can any one help? Thanks Jon Duncan ...

I am looking for a telephone network emulator for the testing of a v.34 or v.90 modem. Can any one help? Thanks Jon Duncan

Hello everybody, I use a XDS510PP plus JTAG emulator by Spectrum Digital, but the diagnostic give me the following erro: ** Emulator Scan...

Hello everybody, I use a XDS510PP plus JTAG emulator by Spectrum Digital, but the diagnostic give me the following erro: ** Emulator Scan Test -- WriteVal1 0001, ReadVal1 ffff -- WriteVal2 fffe, ReadVal2 ffff -- WriteVal1 0002, ReadVal1 ffff -- WriteVal2 fffd, ReadVal2 ffff -- WriteVal1 0004, ReadVal1 ffff -- WriteVal2 fffb, ReadVal2 ffff -- WriteVal1 ...

Does anyone know if it is possible to adapt a C6211DSK to use as a JTAG emulator? It looks as though all that is needed is to...

Does anyone know if it is possible to adapt a C6211DSK to use as a JTAG emulator? It looks as though all that is needed is to attach a cable from the DSK JTAG to the target header and ensure that the DSK's CPU is disabled (or dissconnected). Has anyone tried this?

Hi Mike I was having a grief of a time connecting to my new board but not to a DSK with post in it. Then I remembered an old post...

Hi Mike I was having a grief of a time connecting to my new board but not to a DSK with post in it. Then I remembered an old post where you recommend no gel file. It seems to work. Next you said that the emulator needs free cycles. Could you expond on that and suggest how to be sure, with flashed code, that it gets them. I can put lots of dead

Hello all: I am having trouble with obtaining the correct configuration for this setup: 1. ATEME's IEKC64 with C6416...

Hello all: I am having trouble with obtaining the correct configuration for this setup: 1. ATEME's IEKC64 with C6416 Dsp, Silicon Rev 1.03 2. Code Composer Studio 2.2 3. XDS560 Emulator I did not have to use the emulator's drivers since th

Hello all, I hv a Lyrtech DM648EVM which has on board MSP430 with a JTAG support for programming. I hv recently purchased TI...

Hello all, I hv a Lyrtech DM648EVM which has on board MSP430 with a JTAG support for programming. I hv recently purchased TI MSP-FET430UIF (USB) programmer for it with the IAR kick start(EWB). The problem is, on board MSP430 controller is not recognised by Emulator although I have followed all the instructions. Is there any other HW/SW needed (in addition to one I hv)to Program on...

Hello friends, I wanted to connect Wintech TDS510USBPLUS emulator with our custom board TMS320C6416 dsp.I use Code Composer 3.3 Platinum...

Hello friends, I wanted to connect Wintech TDS510USBPLUS emulator with our custom board TMS320C6416 dsp.I use Code Composer 3.3 Platinum version.But i could not able to connect it. if anybody have known abt this,please reply. -indu _____________________________________

Hi guys, Presently i am having DM642EVM Board with me. I am having CCS2.2 and also i followed the steps they were present in...

Hi guys, Presently i am having DM642EVM Board with me. I am having CCS2.2 and also i followed the steps they were present in the "dm642evm_QuickStartGuide". After installing the patches and "SdConfig C6000 v2.2x" i am not getting the emulator to run. After all installation i started with "Setup CCS 2", then i imported EVMDM642XDS510USB Emulator. Then while starting the CCS2.2 it is...

If you are not writing or reading external memory before releasing the DSP, then you can let the DSP set the EMIF. We find that the program...

If you are not writing or reading external memory before releasing the DSP, then you can let the DSP set the EMIF. We find that the program doesn't run after setting DSPINT if the emulator is connected. Sometimes if the emulator is connected the HPI writes do not happen correctly, either. > > > > hello everyone ? > > I have following queries ?regarding the hpi >

Hello Everybody, We have the new EVMDM648 and are trying to connect the JTAG to it. When we try in SDConfig then we get the following...

Hello Everybody, We have the new EVMDM648 and are trying to connect the JTAG to it. When we try in SDConfig then we get the following messages ** Emulator Test ** $$ EmuProductName=XDS510PP_PLUS $$ EmuPortAddr=0x378 $$ EmuPortMode=SPP8 $$ ProductId=10 $$ ProductVersion=02 ** Emulator Scan Test -- Found JTAG IR length of 6 -- Found 1 JTAG device(s...

Bob- > Thank for your help again. We are still struggling to find the solution. > Here the answer to your question/comments. > > 1) Did...

Bob- > Thank for your help again. We are still struggling to find the solution. > Here the answer to your question/comments. > > 1) Did you check your known-good Win2k system and see if someone had > run SDConfig before? > (A1) I checked all the Emulator settings on the Windows 2000 PC and > made sure that the PC running Windows XP is set the same. Ok. > 2) Did you try running xdsp

An emulator generally is a piece of hardware used for tests; it is self-contained, and is able to be hooked to some kind of...

An emulator generally is a piece of hardware used for tests; it is self-contained, and is able to be hooked to some kind of development environment. A simulator is a piece of software that duplicates as precisely as possible the processor so you can "run" your code t

I am using TMS320c6713B custom board along with Spectrum Digital EMulator xds510usb. While Connecting with my custom board using sdconfig utility...

I am using TMS320c6713B custom board along with Spectrum Digital EMulator xds510usb. While Connecting with my custom board using sdconfig utility I got ok results. It can scan pattern and verfiy patterns also . However when i start CCS studio i found a message " An unknown error prevented the Emulator in a timely fashion. " I have checked with Reset also . It seems fine too. I am using TPS70345 a...

Update #1. Emulator seems to connect to the "brand new" board insted the old "tested" one ... bah. The old is not very reliable! The strange...

Update #1. Emulator seems to connect to the "brand new" board insted the old "tested" one ... bah. The old is not very reliable! The strange thing is that it is very slow in accessing registry or memory contents. If I click on a rigister set I immeditely see all values at "?????????" and after some seconds real (?) values appears. Load a program is not possible due to verification errors. An...

Update #1. > Emulator seems to connect to the "brand new" board insted the old "tested" one ... bah. The old is not very reliable! > The...

Update #1. > Emulator seems to connect to the "brand new" board insted the old "tested" one ... bah. The old is not very reliable! > The strange thing is that it is very slow in accessing registry or memory contents. If I click on a rigister set I immeditely see all values at "?????????" and after some seconds real (?) values appears. > Load a program is not possible due to verification errors

Jeff, Thank for your help again. We are still struggling to find the solution. Here the answer to your question/comments. 1) Did you check...

Jeff, Thank for your help again. We are still struggling to find the solution. Here the answer to your question/comments. 1) Did you check your known-good Win2k system and see if someone had run SDConfig before? (A1) I checked all the Emulator settings on the Windows 2000 PC and made sure that the PC running Windows XP is set the same. 2) Did you try running xdsprobe? (A2)Sorry, don?t

Hello, I was looking for some information about emulators and i found this thread. Just one simply question ¿what is a SEED USB emulator? Thank...

Hello, I was looking for some information about emulators and i found this thread. Just one simply question ¿what is a SEED USB emulator? Thank you, regards Miguel Ángel Jeff, > > Sorry about the top posting. I only have 'very low tech' access at the moment and this is just a pasted text file. > > I will try to make this generic for 'cannot connect problems with NON spectrum digital emul

Hi all We developped a board with four C6201 in the JTAG chain and want to debug them with the XDS510 Emulator and Code...

Hi all We developped a board with four C6201 in the JTAG chain and want to debug them with the XDS510 Emulator and Code Composer Studio Debug Tools 1.20. The DSPs are the only devices in the JTAG chain. The Emulator is connected as in the TI application note SPRA439, figure 5