DSPRelated.com

c6416 hpi problem : hpi read,hpi not ready.

Started by nudt...@sina.com in TMS320c6x15 years ago 2 replies

Hi all: my design is so:On PCB,xilinx FPGA(V5)?Altera FPGA(S2),they both connect TMS320C6416 through HPI. when S2 use HPI of TMS320C6416 , pins...

Hi all: my design is so:On PCB,xilinx FPGA(V5)?Altera FPGA(S2),they both connect TMS320C6416 through HPI. when S2 use HPI of TMS320C6416 , pins of V5 associated to HPI of TMS320C6416 are set to float. when V5 use HPI of TMS320C6416 , pins of s2 associated to HPI of TMS320C6416 are set to float. First ,upon PCB Power on , i don't configure V5 through jtag. and i use S2 to boot dsp through hpi s


I need some advice for TMS320C6416

Started by gavinngan in TMS320c6x17 years ago 4 replies

Hello to all. My name is Huat, and I wish to design a fingerprint authentication system using TMS320C6416. I am totally a beginner...

Hello to all. My name is Huat, and I wish to design a fingerprint authentication system using TMS320C6416. I am totally a beginner in DSP. May I have some advice regarding the feasibility to implement a fingerprint authentication on TMS320C6416 ? I noticed a type-A usb port on the device. After a brief study on the manual,I knew that it is for communication wit...


TMS320C6416 DSK or another EVM???!!!!

Started by nino...@yahoo.it in TMS320c6x19 years ago

Hi all, I'm new in dsp programming, so I need a help to choose the right board for my application in my thesis work. I think to buy...

Hi all, I'm new in dsp programming, so I need a help to choose the right board for my application in my thesis work. I think to buy TMS320C6416 DSP Starter Kit, but I don't know if it fits good. I need 3 analog inputs (from sensors), Spi protocol to communicate with a MMC or SD Card, and 2 serial ports. I can see TMS320C6416 DSP Starter Kit has audio


about TMS320C6416

Started by eng_...@yahoo.com in TMS320c6x17 years ago

Hi,I have TMS320C6416 (1 Ghz) DSP Starter Kit and I need to use it to capture live video from a camera. I don't know if that is possible or not...

Hi,I have TMS320C6416 (1 Ghz) DSP Starter Kit and I need to use it to capture live video from a camera. I don't know if that is possible or not so, I need help from you please. Thanks and Reagards Magdy


Weird EDMA interrupt problem with TMS320C6416 TEB

Started by cytan299 in TMS320c6x22 years ago

Hi all, I have a really weird problem with the TMS30C6416 TEB when I do DMA with EXT INT 4. If the TMS320C6416 is connected like...

Hi all, I have a really weird problem with the TMS30C6416 TEB when I do DMA with EXT INT 4. If the TMS320C6416 is connected like this: TMS320C6416 ------>----- EXT INT 4 pin | |- pushbutton switch | | v and the pushbutton switch is


TMS320C6416 and NT Platforms

Started by mzah...@shuf.com in TMS320c6x14 years ago 2 replies

hi, I'd like to get the TMS320C6416 DSK to use with MATLAB for image processing, but when I was navigating MATLAB help I came across this...

hi, I'd like to get the TMS320C6416 DSK to use with MATLAB for image processing, but when I was navigating MATLAB help I came across this sentence: "C6416 DSP Starter Kit. Does not work on Microsoft Windows NT platforms" what does it mean???? plase help me. regards...... _____________________________________


about TMS320C6416 TEB

Started by Esrafil Jedari in TMS320c6x21 years ago

Dear sir/Madam, I need to have connectors information of TMS320C6416 TEB and its pinouts. WOuld you please help me. Best...

Dear sir/Madam, I need to have connectors information of TMS320C6416 TEB and its pinouts. WOuld you please help me. Best Regards. Esrafil


Help needed on TMS320C6416 with CDMA

Started by jken...@yahoo.com in TMS320c6x15 years ago

hi everyone....my project is based on designing a CDMA transmitter and implementing it on a TMS320C6416 kit. i am new to this field and dont know...

hi everyone....my project is based on designing a CDMA transmitter and implementing it on a TMS320C6416 kit. i am new to this field and dont know how to go about. can someone please guide me along with how to begin. i have the book by chassing and the kit with me. how do i proceed..... _____________________________________


H.264 on TMS320C6416 DSK

Started by eng_...@yahoo.com in TMS320c6x17 years ago

Hh all, I want to implement H.264 on TMS320C6416 DSK but i can't find a daughter card works with my DSK for video input so please i need help...

Hh all, I want to implement H.264 on TMS320C6416 DSK but i can't find a daughter card works with my DSK for video input so please i need help from anybody know about that. thanks and regards, Magdy


TMS320C6416 Ext interrupt 5

Started by ramya_m in TMS320c6x20 years ago

Hi, This is with regard to a problem that we are facing with our DSP TMS320C6416 , version E. The external interrupt 5...

Hi, This is with regard to a problem that we are facing with our DSP TMS320C6416 , version E. The external interrupt 5 , which is multiplexed with GPIO pins is used in order to provide event synchronisation to the Edma.We have configured the GPEN=0xF9 and G


TMS320c6416-BU61580 Problem

Started by ramya_m in TMS320c6x20 years ago 1 reply

Hi, This is regarding a problem that we are facing with our DSP TMS320C6416 Version E.When interfaced with the BU61580 (...

Hi, This is regarding a problem that we are facing with our DSP TMS320C6416 Version E.When interfaced with the BU61580 ( Via EMIFB CE2 space, 16 bit interface,Asynchronous), the read operations from the BU occurr without any problems , with the CE going low for e


need help on Veterbi coprocessor Tms320C6416

Started by Sanjeev in TMS320c6x22 years ago

HI All, i am trying to configure the Viterbi coprocessor of Tms320C6416, unfortunately i could find any sample code to...

HI All, i am trying to configure the Viterbi coprocessor of Tms320C6416, unfortunately i could find any sample code to configure the VCP. I followed the steps given in the manual and configured the VCP , but i couldnt get the results, i didnt know where was the fault...


to connect TMS320C6416 with Wintech TDS510 USB PLUS emulator

Started by iind...@gmail.com in TMS320c6x14 years ago 3 replies

Hello friends, I wanted to connect Wintech TDS510USBPLUS emulator with our custom board TMS320C6416 dsp.I use Code Composer 3.3 Platinum...

Hello friends, I wanted to connect Wintech TDS510USBPLUS emulator with our custom board TMS320C6416 dsp.I use Code Composer 3.3 Platinum version.But i could not able to connect it. if anybody have known abt this,please reply. -indu _____________________________________


TMS320C6416 - Write Operation , problem

Started by ramya_m in TMS320c6x20 years ago 1 reply

Hi , This is with regard to a problem that we are facing with our board , TMS320C6416 , version E. When interfaced with...

Hi , This is with regard to a problem that we are facing with our board , TMS320C6416 , version E. When interfaced with a peripheral , BU 61580, we are able to view the CE pulses during subsequent reads.But , during the write operation , the CE pulses occur


Cypress USB Controller with the TI DSP TMS320C6416

Started by ramya_m in TMS320c6x19 years ago

Hello, This is regarding the interface of the Cypress USB Controller with the TI DSP TMS320C6416. There is an interface document of...

Hello, This is regarding the interface of the Cypress USB Controller with the TI DSP TMS320C6416. There is an interface document of TMS320C6416 and CY7C68001( http://focus.ti.com/lit/an/spraa13a/spra a13a.pdf ) provided in Texas Instruments Website. Suppose if I want to interface Cypress USB Contro


Help to choose appropiate DSK

Started by Antonino in TMS320c6x19 years ago

Hi all, I'm quite new in dsp programming, so I need a help to choose the right board for my application in my thesis work. I'd like to...

Hi all, I'm quite new in dsp programming, so I need a help to choose the right board for my application in my thesis work. I'd like to buy TMS320C6416 DSP Starter Kit, but I don't know if it fits good. I need 3 analog inputs (from sensors), Spi protocol to communicate with a MMC or SD Card, and 2 serial ports. I can see TMS320C6416 DSP Starter Kit has


TMS320C6416- Unable to initialize AIC23 codec

Started by abba...@yahoo.com in TMS320c6x17 years ago

Hello everybody, I have a TMS320C6416 DSK and I wanna acquire sound samples via its AIC23 codec. A CD player send sound to "LINE IN". But my...

Hello everybody, I have a TMS320C6416 DSK and I wanna acquire sound samples via its AIC23 codec. A CD player send sound to "LINE IN". But my interrupt function never is called. With polling, the execution can not pass the "comm_poll" function. This is my simple program: ************************* void main() { comm_intr(); F=fopen("f:\\BoardSam2.h","w"); printf("started"); while(1)...


TMS320C6416 video system

Started by vour...@hotmail.com in TMS320c6x19 years ago

Hi all, I am a newbie in DSP programming, so I need Some help. Here is my project : I wish to set up a decoder video in the following way : my...

Hi all, I am a newbie in DSP programming, so I need Some help. Here is my project : I wish to set up a decoder video in the following way : my board tms320c6416 DSK receives a video stream by an interface (HPI, PCI), decompress the data, sends them towards a graphic display controller by another interface (HPI, PCI). I would like to have notices on this project and to know if it is sensible. I...


Push Button reset problem with TMS320C6416

Started by ramya_m in TMS320c6x20 years ago 2 replies

Hi , This is regarding a problem that we are facing with our board , TMS320C6416 - D6E3 (Silicon Errata version 1.1).We are...

Hi , This is regarding a problem that we are facing with our board , TMS320C6416 - D6E3 (Silicon Errata version 1.1).We are performing secondary boot loading.When the board is reset via the emulator or via power on , the secondary boot loader executes as required.We are


Manual needed - TMS320C6416 TEB

Started by exoson in TMS320c6x16 years ago 1 reply

Does anyone have a manual for the TI TMS320C6416 TEB evaluation board. I have a board but seem to have lost the manual. Scott

Does anyone have a manual for the TI TMS320C6416 TEB evaluation board. I have a board but seem to have lost the manual. Scott