Forums
Asahi Kasei Micro makes dsp ICs such as the AK7755EN. On the website https://www.akm.com/eu/en/products/audio-voice-dsp/lineup-audio-voice-processor/ak7755en/ there...
2-FSK eye diagram - optimal sampling sharp transitions
Started by 1 year ago●4 replies●latest reply 1 year ago●202 viewsHi folks,I have ta analyse a signal transmitted in a burst mode in UHF and I have no apriori about it.The signal seams to be transmitted using a basic 2-FSK modulation.I...
How to avoid harmonic distortions in a DAC?
Started by 1 year ago●4 replies●latest reply 1 year ago●218 viewsI have a DAC which is assumed to be nonlinear, such that it produces unwanted harmonic distortions at integer multiples of the input frequencies. Any other nonlinear...
C code simulation of DSP fixed-point operations with overflow and saturation
Started by 1 year ago●9 replies●latest reply 1 year ago●260 viewsAll-Does anyone have a link to old Texas Inst C code that simulated what their fixed-point DSPs did with overflow and saturation with arithmetic operations (add,...
Simulating multipath fading channel in Python
Started by 1 year ago●2 replies●latest reply 1 year ago●412 viewsHello!I'm trying to figure out how to simulate a multipath fading channel (I'd like to have both a Rayleigh and a Rician channel, no Doppler to simplify things)...
Design low pass filter and decimation stages, how to?
Started by 1 year ago●1 reply●latest reply 1 year ago●239 viewsHi to all!I usually see 24-bit digitizers giving output sample rate at 50, 100, 200 samples per second, selectable by user.Taking a look to code I can see input...
Quantizing the feedback coefficient in the Goertzel algorithm
Started by 1 year ago●2 replies●latest reply 1 year ago●178 viewsThe value of the feedback coefficient in the Goertzel algorithm it given by:c = 2*cos( 2*pi*k/N); where k is the bin number and N is the number of points.Here...
Effect of decimation, tuning (mixing) on phase noise
Started by 1 year ago●9 replies●latest reply 1 year ago●228 viewsIf I build an analog receiver using a DDS where the DDS is my local oscillator (LO), based on a reference oscillator with phase noise ℒ(n), as I decrease the...
Adding 45 degrees phase shift to a FIR bandpass
Started by 8 years ago●15 replies●latest reply 1 year ago●2191 viewsDear sirs, I have a question regarding the calculation of filter taps for a FIR bandpass filter with additional phase shift of approx. 45 degrees. Background: shortwave...
Please login (on the right) if you already have an account on this platform.
Otherwise, please use this form to register (free) an join one of the largest online community for Electrical/Embedded/DSP/FPGA/ML engineers: