Forums
Hello,Does anyone here have the CD-ROM with demo code, manual, and
schematics (or a copy thereof) of TI's EVM320VC5410 Evaluation Module? (https://www.msp.ch/wp/wp-content/uploads/2014/04/7...)Yes,...
Rice channel + AWGN with lower BER than AWGN alone ??

Hello!I am playing with the Matlab simulation of an OFDM-based modem I have created, and I am facing a weird problem: I have my frames pass through the "usual encoding/mapping/modulation/IFFT",...
What set of non-intrusive measures (features) would help to identify bad recordings before speech recognition process?

I'd like to try various non-intrusive features (parameters) that could be calculated from speech recordings (no clean reference) to eliminate bad recordings before...
Receive IF Freq Selection for a Full-Duplex Transceiver

Hello,In a full duplex RF transceiver, what are the potential problems of a
receive IF strip at a frequency that's equal to the separation between the transmit...
Currently what I do is generate random floating point values, feed it to my implementation and fftw simultaneously and check if any bin has deviation beyond a threshold...
Calculating the Effective bit resolution from a .WAV recording?

Good day,I have various .WAV files of underwater recordings. I used a ZOOM H1N recorder and a Hydrophone (https://www.aquarianaudio.com/) to make the recordings....
Band-variable signals filtration - best approach

Dear forum Members,I have to design a filtration in wide 650 MHz band. Detection algorithm finds signals in this band and provides information like: start and stop...
Essential DSP Knowledge for Embedded Systems Engineers

Hello all,would anyone in the DSPRelated community be interested and inspired to give a talk, possibly titled 'Essential DSP Knowledge for Embedded Systems Engineers' at...
What is the maximum output amplitude of an IIR filter?

When implementing a fixed-point digital filter, I need to think about overflow/saturation.
For a FIR filter, the maximum +/- output values (OUTPUT+ and OUTPUT-) are...
Adding 45 degrees phase shift to a FIR bandpass

Dear sirs, I have a question regarding the calculation of filter taps for a FIR bandpass filter with additional phase shift of approx. 45 degrees. Background: shortwave...
Registering will allow you to participate to the forums on ALL the related sites and give you access to all pdf downloads.